1994 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1994 Nissan Altima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x100 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1994 Altima — Year-Specific Fitment Context
The 1994 is the only model year of the Nissan Altima in our database using the 4x100 bolt pattern. Note: the 1993 model used a different pattern (4x114.3), so its wheels are NOT interchangeable with the 1994. Important: starting in 1995, Nissan switched to 4x114.3 — those wheels will not fit the 1994 model. Across its full production run (1993–2024), the Altima has also used: 4x114.3, 5x114.3.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 1994 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 4x114.3 | 66.1 | 35-45 |
| ▸ 1994 | 4x100 | 66.1 | 35-45 |
| 1995 | 4x114.3 | 66.1 | 35-45 |
| 1996 | 4x114.3 | 66.1 | 35-45 |
| 1997 | 4x114.3 | 66.1 | 35-45 |
| 1998 | 4x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
4x100 Pattern Context
This bolt pattern appears on 474 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 4x100:
Expert Buying Guide for 1994 Nissan Altima
For your 1994 Nissan Altima, the 5x114.3 bolt pattern is shared across 1993–2024 models, ensuring broad compatibility. However, the 66.1mm center bore is critical: aftermarket wheels often have larger bores, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 35-45mm; deviations risk rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and matching seat type (cone or ball) to avoid loosening or damage. Safety first: verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across model years, this model appears with 3 bolt patterns (4x100, 4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 3
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain clamping force.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause steering wheel vibration.
- ✅ Check brake caliper clearance when using wheels with offset near 35mm, as some designs may contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
1994 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 1994 Nissan Altima?
The 1994 Nissan Altima uses a 4x100 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 35-45mm.
Will 1995 Nissan Altima wheels fit a 1994 model?
No. The 1995 Nissan Altima switched to a 4x114.3 bolt pattern, which is not compatible with the 1994 model's 4x100. Using mismatched patterns is unsafe.
Will wheels from another Nissan fit my 1994 Altima?
Only if they share the exact same 4x100 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Can I use spacers on my 1994 Nissan Altima?
Yes, but ensure the wheel spacers match the 4x100 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
How do I measure the bolt pattern on my 1994 Nissan?
The 1994 Altima uses a 4x100 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What does 35-45mm offset mean for the 1994 Altima?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset