2012 Nissan Altima Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Nissan Altima, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2012 Altima — Year-Specific Fitment Context
The 2012 Nissan Altima is in year 20 of 32 using the 5x114.3 pattern (1993–2024). Wheels from any 1993–2024 Nissan Altima are cross-compatible with the 2012 model.
Nissan Altima Bolt Pattern by Year
The table below shows how the Altima's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1993 | 5x114.3 | 66.1 | 35-45 |
| 1994 | 5x114.3 | 66.1 | 35-45 |
| 1995 | 5x114.3 | 66.1 | 35-45 |
| 1996 | 5x114.3 | 66.1 | 35-45 |
| 1997 | 5x114.3 | 66.1 | 35-45 |
| 1998 | 5x114.3 | 66.1 | 35-45 |
| 1999 | 5x114.3 | 66.1 | 35-45 |
| 2000 | 5x114.3 | 66.1 | 40 |
| 2001 | 5x114.3 | 66.1 | 40 |
| 2002 | 5x114.3 | 66.1 | 40 |
| 2003 | 5x114.3 | 66.1 | 40 |
| 2004 | 5x114.3 | 66.1 | 40 |
| 2005 | 5x114.3 | 66.1 | 40 |
| 2006 | 5x114.3 | 66.1 | 40 |
| 2007 | 5x114.3 | 66.1 | 40 |
| 2008 | 5x114.3 | 66.1 | 40 |
| 2009 | 5x114.3 | 66.1 | 40 |
| 2010 | 5x114.3 | 66.1 | 40 |
| 2011 | 5x114.3 | 66.1 | 40 |
| ▸ 2012 | 5x114.3 | 66.1 | 40 |
| 2013 | 5x114.3 | 66.1 | 40 |
| 2014 | 5x114.3 | 66.1 | 40 |
| 2015 | 5x114.3 | 66.1 | 40 |
| 2016 | 5x114.3 | 66.1 | 40 |
| 2017 | 5x114.3 | 66.1 | 40 |
| 2018 | 5x114.3 | 66.1 | 40 |
| 2019 | 5x114.3 | 66.1 | 40 |
| 2020 | 5x114.3 | 66.1 | 40 |
| 2021 | 5x114.3 | 66.1 | 40 |
| 2022 | 5x114.3 | 66.1 | 40 |
| 2023 | 5x114.3 | 66.1 | 40 |
| 2024 | 5x114.3 | 66.1 | 40 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2012 Nissan Altima
For your 2012 Nissan Altima, the critical fitment specs are: bolt pattern 5x114.3, center bore 66.1mm, offset 40mm, and lug nut size 12x1.25. When selecting aftermarket wheels, ensure the center bore is at least 66.1mm; if larger, use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: a ±5mm change is acceptable, but deviations beyond may cause rubbing or clearance issues. Always verify lug nut seat type—factory uses 60-degree conical seats. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Altima appears from 1993 to 2024 (32 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 85.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore smaller than 66.1mm; they will not fit without machining.
- ✅ Check for caliper clearance with aftermarket wheels, especially if offset is lower than 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2012 Nissan Altima — Frequently Asked Questions
What is the bolt pattern for a 2012 Nissan Altima?
The 2012 Nissan Altima uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 40mm.
What other years of Nissan Altima have the same bolt pattern as the 2012?
The Nissan Altima uses the 5x114.3 pattern from 1993 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2012 Nissan?
The 2012 Altima uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2012 Nissan Altima?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2012 Nissan Altima?
The factory center bore (hub bore) for the 2012 Nissan Altima is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Nissan fit my 2012 Altima?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset