2012 Nissan cube Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2012 Nissan cube, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2012 cube — Year-Specific Fitment Context
The 2012 Nissan cube is in year 4 of 6 using the 4x114.3 pattern (2009–2014). Wheels from any 2009–2014 Nissan cube are cross-compatible with the 2012 model.
Nissan cube Bolt Pattern by Year
The table below shows how the cube's wheel specifications have changed over the years. The 2012 model year is highlighted.
Fitment Notes
The 2012 Nissan cube has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Nissan cube appears from 2009 to 2014 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
2012 Nissan cube — Frequently Asked Questions
What is the bolt pattern for a 2012 Nissan cube?
The 2012 Nissan cube uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 42mm.
What other years of Nissan cube have the same bolt pattern as the 2012?
The Nissan cube uses the 4x114.3 pattern from 2009 through 2014. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What does 42mm offset mean for the 2012 cube?
An offset of 42mm means the wheel's mounting surface is 42mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
What is the PCD for a 2012 Nissan cube?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 cube, the PCD is 4x114.3.
Why is matching the 66.1mm center bore important for the 2012 cube?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the factory wheel offset for a 2012 Nissan cube?
The OEM offset for the 2012 cube is typically around 42mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Nissan cube is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2009-2014 (6 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 87.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 2.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2012 Nissan cube, please report it via our About page contact so we can verify and update this record.