2013 Nissan cube Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2013 Nissan cube, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 42 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2013 cube — Year-Specific Fitment Context
The 2013 Nissan cube is in year 5 of 6 using the 4x114.3 pattern (2009–2014). Wheels from any 2009–2014 Nissan cube are cross-compatible with the 2013 model.
Nissan cube Bolt Pattern by Year
The table below shows how the cube's wheel specifications have changed over the years. The 2013 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2013 Nissan cube
For the 2013 Nissan cube, the 4x114.3 bolt pattern is shared across 2009-2014 models, ensuring cross-compatibility. The 66.1mm center bore is critical: aftermarket wheels with larger bores require hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive; the factory 42mm offset maintains proper suspension geometry and clearance. Deviating more than ±5mm may cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (M12x1.25) and seat type (conical 60-degree for most aftermarket wheels; factory wheels use a ball seat). Improper lug nuts can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan cube appears from 2009 to 2014 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 87.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 66.1mm to avoid vibrations.
- ✅ Stick to offsets between 38mm and 47mm to maintain proper clearance and handling.
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles; use a torque wrench to prevent over-tightening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2013 Nissan cube — Frequently Asked Questions
What is the bolt pattern for a 2013 Nissan cube?
The 2013 Nissan cube uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 42mm.
What other years of Nissan cube have the same bolt pattern as the 2013?
The Nissan cube uses the 4x114.3 pattern from 2009 through 2014. Wheels from any of these model years are dimensionally compatible with the 2013, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2013 Nissan cube?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Do 2013 Nissan cubes use lug bolts or lug nuts?
The 2013 cube requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the PCD for a 2013 Nissan cube?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2013 cube, the PCD is 4x114.3.
Will wheels from another Nissan fit my 2013 cube?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset