2002 Nissan Frontier Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2002 Nissan Frontier Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 100.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2002 Frontier Crew Cab — Year-Specific Fitment Context
The 2002 Nissan Frontier Crew Cab is in year 3 of 5 using the 6x139.7 pattern (2000–2004). Wheels from any 2000–2004 Nissan Frontier Crew Cab are cross-compatible with the 2002 model. Across its full production run (2000–2024), the Frontier Crew Cab has also used: 6x114.3.
Nissan Frontier Crew Cab Bolt Pattern by Year
The table below shows how the Frontier Crew Cab's wheel specifications have changed over the years. The 2002 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| ▸ 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 30 |
| 2018 | 6x114.3 | 66.1 | 30 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2002 Nissan Frontier Crew Cab
For your 2002 Nissan Frontier Crew Cab, the critical fitment specs are: bolt pattern 6x139.7mm, center bore 100.1mm, offset 30mm, and lug nut size 12x1.25. The 100.1mm center bore is vehicle-specific; aftermarket wheels often have a larger bore (e.g., 108mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive: staying within ±5mm of 30mm is recommended to avoid rubbing or poor handling. Always use lug nuts with the correct 12x1.25 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or the factory ball seat. Never mix seat types. Re-torque after 50-100 miles. Wheels from 2000-2004 Frontier Crew Cab models are direct fit.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Crew Cab appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 100.1mm to prevent vibrations and ensure proper load distribution.
- ✅ Stick to offset within 25-35mm range; going lower (more negative) may cause rubbing on suspension or fenders, higher (more positive) may contact brake calipers.
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving, and check periodically to prevent loosening.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2002 Nissan Frontier Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2002 Nissan Frontier Crew Cab?
The 2002 Nissan Frontier Crew Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.1mm and the offset is 30mm.
What other years of Nissan Frontier Crew Cab have the same bolt pattern as the 2002?
The Nissan Frontier Crew Cab uses the 6x139.7 pattern from 2000 through 2004. Wheels from any of these model years are dimensionally compatible with the 2002, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2002 Nissan Frontier Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 30mm, and a center bore of at least 100.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2002 Nissan?
The 2002 Frontier Crew Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
How tight should I torque the lug nuts on a 2002 Nissan Frontier Crew Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Will wheels from another Nissan fit my 2002 Frontier Crew Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 100.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset