2007 Nissan Frontier Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Nissan Frontier Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Frontier Crew Cab — Year-Specific Fitment Context
The 2007 Nissan Frontier Crew Cab is in year 3 of 20 using the 6x114.3 pattern (2005–2024). Wheels from any 2005–2024 Nissan Frontier Crew Cab are cross-compatible with the 2007 model. Across its full production run (2000–2024), the Frontier Crew Cab has also used: 6x139.7.
Nissan Frontier Crew Cab Bolt Pattern by Year
The table below shows how the Frontier Crew Cab's wheel specifications have changed over the years. The 2007 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| ▸ 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 30 |
| 2018 | 6x114.3 | 66.1 | 30 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2007 Nissan Frontier Crew Cab
For your 2007 Nissan Frontier Crew Cab, the 6x114.3 bolt pattern is shared with 2005–2024 models, ensuring broad cross-compatibility. However, the 66.1mm center bore is critical: aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset is sensitive; stock is around 30mm. Sticking within ±5mm maintains suspension geometry and avoids rubbing. Always use lug nuts with the correct 12x1.25 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or ball seat (OEM). Mixing seat types can cause wheel loosening. Safety first: verify fitment with a test fit before final installation.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Crew Cab appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Aftermarket wheels with a 73.1mm bore require hub-centric rings; plastic rings are fine for street use, aluminum for track.
- ✅ Avoid spacers larger than 5mm without extended studs; verify offset clearance with suspension and fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Nissan Frontier Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2007 Nissan Frontier Crew Cab?
The 2007 Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier Crew Cab have the same bolt pattern as the 2007?
The Nissan Frontier Crew Cab uses the 6x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the factory wheel offset for a 2007 Nissan Frontier Crew Cab?
The OEM offset for the 2007 Frontier Crew Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the center bore of a 2007 Nissan Frontier Crew Cab?
The factory center bore (hub bore) for the 2007 Nissan Frontier Crew Cab is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2007 Nissan Frontier Crew Cabs use lug bolts or lug nuts?
The 2007 Frontier Crew Cab requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2007 Nissan Frontier Crew Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset