2019 Nissan Frontier Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan Frontier Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 Frontier Crew Cab — Year-Specific Fitment Context
The 2019 Nissan Frontier Crew Cab is in year 15 of 20 using the 6x114.3 pattern (2005–2024). Wheels from any 2005–2024 Nissan Frontier Crew Cab are cross-compatible with the 2019 model. Across its full production run (2000–2024), the Frontier Crew Cab has also used: 6x139.7.
Nissan Frontier Crew Cab Bolt Pattern by Year
The table below shows how the Frontier Crew Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 30 |
| 2018 | 6x114.3 | 66.1 | 30 |
| ▸ 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2019 Nissan Frontier Crew Cab
For the 2019 Nissan Frontier Crew Cab, the correct bolt pattern is 6x114.3mm with a center bore of 66.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The factory offset is 30mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.25) and seat type—factory uses conical (60-degree) seats. Using incorrect lug nuts can lead to wheel detachment. Wheels from 2005–2024 Frontier Crew Cabs are cross-compatible, but avoid 6x139.7 pattern wheels from earlier models.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Crew Cab appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50 miles of driving.
- ✅ Aftermarket wheels with a larger center bore require hub-centric rings to avoid vibrations.
- ✅ Check offset carefully: +30mm is standard; lower offset may cause tire rub on suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Nissan Frontier Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 Nissan Frontier Crew Cab?
The 2019 Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier Crew Cab have the same bolt pattern as the 2019?
The Nissan Frontier Crew Cab uses the 6x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Will wheels from another Nissan fit my 2019 Frontier Crew Cab?
Only if they share the exact same 6x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Can I put aftermarket wheels on my 2019 Nissan Frontier Crew Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x114.3 bolt pattern, an offset near 30mm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the center bore of a 2019 Nissan Frontier Crew Cab?
The factory center bore (hub bore) for the 2019 Nissan Frontier Crew Cab is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Why is matching the 66.1mm center bore important for the 2019 Frontier Crew Cab?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset