2020 Nissan Frontier Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan Frontier Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 Frontier Crew Cab — Year-Specific Fitment Context
The 2020 Nissan Frontier Crew Cab is in year 16 of 20 using the 6x114.3 pattern (2005–2024). Wheels from any 2005–2024 Nissan Frontier Crew Cab are cross-compatible with the 2020 model. Across its full production run (2000–2024), the Frontier Crew Cab has also used: 6x139.7.
Nissan Frontier Crew Cab Bolt Pattern by Year
The table below shows how the Frontier Crew Cab's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 30 |
| 2018 | 6x114.3 | 66.1 | 30 |
| 2019 | 6x114.3 | 66.1 | 30 |
| ▸ 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2020 Nissan Frontier Crew Cab
For your 2020 Nissan Frontier Crew Cab, the 6x114.3 bolt pattern and 66.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure load is carried by the hub, not the lug nuts. Offset is sensitive; the factory 30mm offset maintains proper suspension geometry and tire clearance. Deviating more than ±10mm may cause rubbing or handling issues. Always use lug nuts with the correct 12x1.25 thread pitch and a conical (60-degree) or ball seat matching your wheels. Improper seating can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Crew Cab appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 66.1mm.
- ✅ Check that aftermarket wheels have sufficient clearance for brake calipers and suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Nissan Frontier Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan Frontier Crew Cab?
The 2020 Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier Crew Cab have the same bolt pattern as the 2020?
The Nissan Frontier Crew Cab uses the 6x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Do 2020 Nissan Frontier Crew Cabs use lug bolts or lug nuts?
The 2020 Frontier Crew Cab requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2020 Nissan Frontier Crew Cab?
The factory center bore (hub bore) for the 2020 Nissan Frontier Crew Cab is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What does 30mm offset mean for the 2020 Frontier Crew Cab?
An offset of 30mm means the wheel's mounting surface is 30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
How do I measure the bolt pattern on my 2020 Nissan?
The 2020 Frontier Crew Cab uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset