2012 Nissan Frontier Crew Cab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2012 Nissan Frontier Crew Cab is 6x114.3. It has a center bore of 66.1 mm, an offset range of 30, and utilizes 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2012 Nissan Frontier Crew Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 30 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
2012 Frontier Crew Cab — Year-Specific Fitment Context
The 2012 Nissan Frontier Crew Cab is in year 8 of 20 using the 6x114.3 pattern (2005–2024). Wheels from any 2005–2024 Nissan Frontier Crew Cab are cross-compatible with the 2012 model. Across its full production run (2000–2024), the Frontier Crew Cab has also used: 6x139.7.
Nissan Frontier Crew Cab Bolt Pattern by Year
The table below shows how the Frontier Crew Cab's wheel specifications have changed over the years. The 2012 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| ▸ 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 30 |
| 2018 | 6x114.3 | 66.1 | 30 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
2012 Nissan Frontier Crew Cab Wheel Interchange & Donor Fitment Guide (6x114.3)
The 6x114.3 bolt pattern is shared by 119 vehicles in our database (uncommon). For safe wheel swaps on the 2012 Nissan Frontier Crew Cab, donor rims must match the 6x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 6x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2007 Nissan Frontier King Cab | 66.1 mm (Exact) | 30 | N 12x1.25 (Cone) |
| 2007 Nissan Pathfinder | 66.1 mm (Exact) | 30 | N 12x1.25 (Cone) |
| 2007 Nissan Titan King Cab | 66.1 mm (Exact) | 30 | N 12x1.25 (Cone) |
| 2017 Nissan TITAN XD King Cab | 66.1 mm (Exact) | 45 | N 12x1.25 (Cone) |
| 2005 Nissan Xterra | 66.1 mm (Exact) | 30 | 12x1.25 (Cone) |
| 2009 Suzuki Equator Crew Cab | 66.1 mm (Exact) | 30 | 12x1.25 (Cone) |
HUB RING FITMENT Same 6x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2013 SRT Viper | 71.5 mm | 71.5mm → 66.1mm |
20-40mm |
| 1992 Dodge Dakota Club Cab | 71.5 mm | 71.5mm → 66.1mm |
30 |
| 2000 Dodge Dakota Quad Cab | 71.5 mm | 71.5mm → 66.1mm |
30 |
| 1992 Dodge Dakota Regular Cab | 71.5 mm | 71.5mm → 66.1mm |
30 |
| 1998 Dodge Durango | 71.6 mm | 71.6mm → 66.1mm |
30 |
Expert Buying Guide for 2012 Nissan Frontier Crew Cab
For your 2012 Nissan Frontier Crew Cab, the 66.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The 30mm offset is sensitive—deviating more than ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct 12x1.25 thread pitch and a conical (60-degree) seat; ball-seat nuts are incompatible and dangerous. Verify wheel load rating meets or exceeds OEM specs. Wheels from 2005–2024 Frontier Crew Cabs are direct fit, but avoid 6x139.7 pattern wheels from earlier models.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Crew Cab appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Check brake caliper clearance when using wheels with offset below 25mm or above 35mm.
- ✅ Avoid using aftermarket wheels without hub-centric rings; the 66.1mm bore is vehicle-specific.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2012 Nissan Frontier Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2012 Nissan Frontier Crew Cab?
The 2012 Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier Crew Cab have the same bolt pattern as the 2012?
The Nissan Frontier Crew Cab uses the 6x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2012, provided the offset and center bore also match.
What is the factory wheel offset for a 2012 Nissan Frontier Crew Cab?
The OEM offset for the 2012 Frontier Crew Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2012 Nissan Frontier Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2012 Frontier Crew Cab, the PCD is 6x114.3.
Can I use spacers on my 2012 Nissan Frontier Crew Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Do 2012 Nissan Frontier Crew Cabs use lug bolts or lug nuts?
The 2012 Frontier Crew Cab requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →