2011 Nissan Frontier Crew Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Nissan Frontier Crew Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2011 Frontier Crew Cab — Year-Specific Fitment Context
The 2011 Nissan Frontier Crew Cab is in year 7 of 20 using the 6x114.3 pattern (2005–2024). Wheels from any 2005–2024 Nissan Frontier Crew Cab are cross-compatible with the 2011 model. Across its full production run (2000–2024), the Frontier Crew Cab has also used: 6x139.7.
Nissan Frontier Crew Cab Bolt Pattern by Year
The table below shows how the Frontier Crew Cab's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| ▸ 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 30 |
| 2018 | 6x114.3 | 66.1 | 30 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2011 Nissan Frontier Crew Cab
For your 2011 Nissan Frontier Crew Cab, the critical specs are: bolt pattern 6x114.3, center bore 66.1mm, offset 30mm, and lug nut size 12x1.25. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; staying within ±5mm of 30mm avoids rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type—factory uses conical/60-degree seats. Mixing seat types (e.g., ball seat) can cause wheel loosening. Re-torque after 50-100 miles. Wheels from 2005-2024 Frontier Crew Cab models are direct fit.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Crew Cab appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 98 ft-lb after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 66.1mm.
- ✅ Avoid wheels with offset below 25mm or above 35mm to prevent fender rubbing or brake clearance issues.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Nissan Frontier Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2011 Nissan Frontier Crew Cab?
The 2011 Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier Crew Cab have the same bolt pattern as the 2011?
The Nissan Frontier Crew Cab uses the 6x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What is the PCD for a 2011 Nissan Frontier Crew Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Frontier Crew Cab, the PCD is 6x114.3.
What does 30mm offset mean for the 2011 Frontier Crew Cab?
An offset of 30mm means the wheel's mounting surface is 30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Can I use spacers on my 2011 Nissan Frontier Crew Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the factory wheel offset for a 2011 Nissan Frontier Crew Cab?
The OEM offset for the 2011 Frontier Crew Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset