2014 Nissan Frontier Crew Cab Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2014 Nissan Frontier Crew Cab is 6x114.3. It has a center bore of 66.1 mm, an offset range of 30, and utilizes 12x1.25 (Cone seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2014 Nissan Frontier Crew Cab Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Center Bore (Hub Bore) | 66.1 mm |
| Offset Range (ET) | 30 |
| Thread Size (Lug Nut / Bolt) | 12x1.25 |
| Fastener Seat Type | Conical 60° (Cone / Tapered) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
2014 Frontier Crew Cab — Year-Specific Fitment Context
The 2014 Nissan Frontier Crew Cab is in year 10 of 20 using the 6x114.3 pattern (2005–2024). Wheels from any 2005–2024 Nissan Frontier Crew Cab are cross-compatible with the 2014 model. Across its full production run (2000–2024), the Frontier Crew Cab has also used: 6x139.7.
Nissan Frontier Crew Cab Bolt Pattern by Year
The table below shows how the Frontier Crew Cab's wheel specifications have changed over the years. The 2014 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2000 | 6x139.7 | 100.1 | 30 |
| 2001 | 6x139.7 | 100.1 | 30 |
| 2002 | 6x139.7 | 100.1 | 30 |
| 2003 | 6x139.7 | 100.1 | 30 |
| 2004 | 6x139.7 | 100.1 | 30 |
| 2005 | 6x114.3 | 66.1 | 30 |
| 2006 | 6x114.3 | 66.1 | 30 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| ▸ 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 30 |
| 2018 | 6x114.3 | 66.1 | 30 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
2014 Nissan Frontier Crew Cab Wheel Interchange & Donor Fitment Guide (6x114.3)
The 6x114.3 bolt pattern is shared by 119 vehicles in our database (uncommon). For safe wheel swaps on the 2014 Nissan Frontier Crew Cab, donor rims must match the 6x114.3 PCD and have a center bore of at least 66.1 mm:
DIRECT HUB MATCH Same 6x114.3 Pattern & Exact 66.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2009 Suzuki Equator Crew Cab | 66.1 mm (Exact) | 30 | 12x1.25 (Cone) |
| 2009 Suzuki Equator Extended Cab | 66.1 mm (Exact) | 30 | 12x1.25 (Cone) |
| 2024 Nissan Frontier | 66.1 mm (Exact) | 30-45 | 12x1.25 (Flat) |
| 2007 Nissan Frontier King Cab | 66.1 mm (Exact) | 30 | N 12x1.25 (Cone) |
| 2007 Nissan Pathfinder | 66.1 mm (Exact) | 30 | N 12x1.25 (Cone) |
| 2007 Nissan Titan King Cab | 66.1 mm (Exact) | 30 | N 12x1.25 (Cone) |
HUB RING FITMENT Same 6x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2014 SRT Viper | 71.5 mm | 71.5mm → 66.1mm |
20-40mm |
| 1992 Dodge Dakota Club Cab | 71.5 mm | 71.5mm → 66.1mm |
30 |
| 2000 Dodge Dakota Quad Cab | 71.5 mm | 71.5mm → 66.1mm |
30 |
| 1992 Dodge Dakota Regular Cab | 71.5 mm | 71.5mm → 66.1mm |
30 |
| 1998 Dodge Durango | 71.6 mm | 71.6mm → 66.1mm |
30 |
Expert Buying Guide for 2014 Nissan Frontier Crew Cab
For your 2014 Nissan Frontier Crew Cab, the 6x114.3 bolt pattern is shared with 2005–2024 models, ensuring cross-compatibility. The 66.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and stress on lug studs. Offset is sensitive: stock is 30mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use 12x1.25 lug nuts with the correct seat (factory is conical/60-degree taper). Avoid ball-seat nuts as they can loosen. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Nissan Frontier Crew Cab appears from 2000 to 2024 (25 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85–95 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 66.1mm bore exactly.
- ✅ Check for brake caliper clearance when changing offset; +20mm to +40mm is safe.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
2014 Nissan Frontier Crew Cab — Frequently Asked Questions
What is the bolt pattern for a 2014 Nissan Frontier Crew Cab?
The 2014 Nissan Frontier Crew Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier Crew Cab have the same bolt pattern as the 2014?
The Nissan Frontier Crew Cab uses the 6x114.3 pattern from 2005 through 2024. Wheels from any of these model years are dimensionally compatible with the 2014, provided the offset and center bore also match.
Do 2014 Nissan Frontier Crew Cabs use lug bolts or lug nuts?
The 2014 Frontier Crew Cab requires 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How do I measure the bolt pattern on my 2014 Nissan?
The 2014 Frontier Crew Cab uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Can I use spacers on my 2014 Nissan Frontier Crew Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
What is the factory wheel offset for a 2014 Nissan Frontier Crew Cab?
The OEM offset for the 2014 Frontier Crew Cab is typically around 30mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need Full Fitment Data in Bulk?
Stop scraping or looking up cars one by one. Import 12,400+ verified vehicle specs (1992–2025) directly into your Shopify store, inventory system, or custom automotive software.
Explore Master Database (CSV) →