2015 Nissan Frontier King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2015 Nissan Frontier King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2015 Frontier King Cab — Year-Specific Fitment Context
The 2015 Nissan Frontier King Cab is in year 9 of 18 using the 6x114.3 pattern (2007–2024). Wheels from any 2007–2024 Nissan Frontier King Cab are cross-compatible with the 2015 model. Across its full production run (1998–2024), the Frontier King Cab has also used: 6x139.7.
Nissan Frontier King Cab Bolt Pattern by Year
The table below shows how the Frontier King Cab's wheel specifications have changed over the years. The 2015 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x139.7 | 100.0 | 40 |
| 1999 | 6x139.7 | 100.0 | 40 |
| 2000 | 6x139.7 | 100.0 | 40 |
| 2001 | 6x139.7 | 100.0 | 40 |
| 2002 | 6x139.7 | 100.0 | 40 |
| 2003 | 6x139.7 | 100.0 | 40 |
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| ▸ 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2015 Nissan Frontier King Cab
The 2015 Nissan Frontier King Cab uses a 6x114.3 bolt pattern with a 66.1mm center bore. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. Offset is critical: the factory offset is 30mm, and deviations beyond ±10mm may cause rubbing or clearance issues. Always use the correct lug nuts: M12x1.25 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen or damage the wheel. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Nissan Frontier King Cab appears from 1998 to 2024 (27 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore and use hub-centric rings if bore >66.1mm.
- ✅ Avoid spacers without extended studs; stock studs may be too short for safe engagement.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2015 Nissan Frontier King Cab — Frequently Asked Questions
What is the bolt pattern for a 2015 Nissan Frontier King Cab?
The 2015 Nissan Frontier King Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier King Cab have the same bolt pattern as the 2015?
The Nissan Frontier King Cab uses the 6x114.3 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2015, provided the offset and center bore also match.
Can I use spacers on my 2015 Nissan Frontier King Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Do 2015 Nissan Frontier King Cabs use lug bolts or lug nuts?
The 2015 Frontier King Cab requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I put aftermarket wheels on my 2015 Nissan Frontier King Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x114.3 bolt pattern, an offset near 30mm, and a center bore of at least 66.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2015 Nissan?
The 2015 Frontier King Cab uses a 6x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset