2020 Nissan Frontier King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Nissan Frontier King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 Frontier King Cab — Year-Specific Fitment Context
The 2020 Nissan Frontier King Cab is in year 14 of 18 using the 6x114.3 pattern (2007–2024). Wheels from any 2007–2024 Nissan Frontier King Cab are cross-compatible with the 2020 model. Across its full production run (1998–2024), the Frontier King Cab has also used: 6x139.7.
Nissan Frontier King Cab Bolt Pattern by Year
The table below shows how the Frontier King Cab's wheel specifications have changed over the years. The 2020 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x139.7 | 100.0 | 40 |
| 1999 | 6x139.7 | 100.0 | 40 |
| 2000 | 6x139.7 | 100.0 | 40 |
| 2001 | 6x139.7 | 100.0 | 40 |
| 2002 | 6x139.7 | 100.0 | 40 |
| 2003 | 6x139.7 | 100.0 | 40 |
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x114.3 | 66.1 | 30 |
| ▸ 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2020 Nissan Frontier King Cab
For the 2020 Nissan Frontier King Cab, the 6x114.3 bolt pattern and 66.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lug nuts. Offset is sensitive; the factory 30mm offset should be maintained within ±5mm to avoid rubbing or suspension interference. Always use lug nuts with the correct 12x1.25 thread pitch and a 60-degree conical seat (common for aftermarket wheels) or the factory ball seat. Never mix seat types. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Frontier King Cab appears from 1998 to 2024 (27 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 66.1mm and outer diameter matches wheel bore.
- ✅ Check for caliper clearance with aftermarket wheels, especially if offset is reduced below 25mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Nissan Frontier King Cab — Frequently Asked Questions
What is the bolt pattern for a 2020 Nissan Frontier King Cab?
The 2020 Nissan Frontier King Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier King Cab have the same bolt pattern as the 2020?
The Nissan Frontier King Cab uses the 6x114.3 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2020 Nissan Frontier King Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x114.3 bolt pattern, an offset near 30mm, and a center bore of at least 66.1mm (using hub rings if larger).
What is the center bore of a 2020 Nissan Frontier King Cab?
The factory center bore (hub bore) for the 2020 Nissan Frontier King Cab is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Nissan fit my 2020 Frontier King Cab?
Only if they share the exact same 6x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
Why is matching the 66.1mm center bore important for the 2020 Frontier King Cab?
The 66.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset