2003 Nissan Frontier King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 Nissan Frontier King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 100.0 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2003 Frontier King Cab — Year-Specific Fitment Context
The 2003 Nissan Frontier King Cab is in year 6 of 9 using the 6x139.7 pattern (1998–2006). Wheels from any 1998–2006 Nissan Frontier King Cab are cross-compatible with the 2003 model. Across its full production run (1998–2024), the Frontier King Cab has also used: 6x114.3.
Nissan Frontier King Cab Bolt Pattern by Year
The table below shows how the Frontier King Cab's wheel specifications have changed over the years. The 2003 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x139.7 | 100.0 | 40 |
| 1999 | 6x139.7 | 100.0 | 40 |
| 2000 | 6x139.7 | 100.0 | 40 |
| 2001 | 6x139.7 | 100.0 | 40 |
| 2002 | 6x139.7 | 100.0 | 40 |
| ▸ 2003 | 6x139.7 | 100.0 | 40 |
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2003 Nissan Frontier King Cab
For your 2003 Nissan Frontier King Cab, the 6x139.7 bolt pattern and 100.0mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 40mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always use the correct lug nuts: M12x1.25 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen, leading to wheel detachment. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Nissan Frontier King Cab appears from 1998 to 2024 (27 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-105 ft-lbs after 50 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 100.0mm center bore exactly.
- ✅ Avoid spacers without extended studs; they can reduce thread engagement and cause failure.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2003 Nissan Frontier King Cab — Frequently Asked Questions
What is the bolt pattern for a 2003 Nissan Frontier King Cab?
The 2003 Nissan Frontier King Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.0mm and the offset is 40mm.
What other years of Nissan Frontier King Cab have the same bolt pattern as the 2003?
The Nissan Frontier King Cab uses the 6x139.7 pattern from 1998 through 2006. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.
What is the factory wheel offset for a 2003 Nissan Frontier King Cab?
The OEM offset for the 2003 Frontier King Cab is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2003 Nissan Frontier King Cab?
Yes, but ensure the wheel spacers match the 6x139.7 bolt pattern and 100.0mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
What is the PCD for a 2003 Nissan Frontier King Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2003 Frontier King Cab, the PCD is 6x139.7.
How do I measure the bolt pattern on my 2003 Nissan?
The 2003 Frontier King Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset