2004 Nissan Frontier King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Nissan Frontier King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 100.0 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2004 Frontier King Cab — Year-Specific Fitment Context
The 2004 Nissan Frontier King Cab is in year 7 of 9 using the 6x139.7 pattern (1998–2006). Wheels from any 1998–2006 Nissan Frontier King Cab are cross-compatible with the 2004 model. Across its full production run (1998–2024), the Frontier King Cab has also used: 6x114.3.
Nissan Frontier King Cab Bolt Pattern by Year
The table below shows how the Frontier King Cab's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x139.7 | 100.0 | 40 |
| 1999 | 6x139.7 | 100.0 | 40 |
| 2000 | 6x139.7 | 100.0 | 40 |
| 2001 | 6x139.7 | 100.0 | 40 |
| 2002 | 6x139.7 | 100.0 | 40 |
| 2003 | 6x139.7 | 100.0 | 40 |
| ▸ 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2004 Nissan Frontier King Cab
For your 2004 Nissan Frontier King Cab, the 6x139.7 bolt pattern is shared with 1998–2006 models. The center bore is 100.0mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is critical: stock is 40mm. Using wheels with offset outside 30–50mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball seat) matching the wheel. Improper lug nuts can lead to wheel loss. Re-torque after 50–100 miles.
Historical Fitment Data Reference
In our dataset, Nissan Frontier King Cab appears from 1998 to 2024 (27 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85–95 ft-lbs after 50–100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric rings are installed to match the 100.0mm center bore.
- ✅ Avoid wheels with offset below 30mm or above 50mm to prevent rubbing on suspension or body.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Nissan Frontier King Cab — Frequently Asked Questions
What is the bolt pattern for a 2004 Nissan Frontier King Cab?
The 2004 Nissan Frontier King Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 100.0mm and the offset is 40mm.
What other years of Nissan Frontier King Cab have the same bolt pattern as the 2004?
The Nissan Frontier King Cab uses the 6x139.7 pattern from 1998 through 2006. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
What is the center bore of a 2004 Nissan Frontier King Cab?
The factory center bore (hub bore) for the 2004 Nissan Frontier King Cab is 100.0mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2004 Nissan Frontier King Cabs use lug bolts or lug nuts?
The 2004 Frontier King Cab requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
How tight should I torque the lug nuts on a 2004 Nissan Frontier King Cab?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Why is matching the 100.0mm center bore important for the 2004 Frontier King Cab?
The 100.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset