2019 Nissan Frontier King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Nissan Frontier King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2019 Frontier King Cab — Year-Specific Fitment Context
The 2019 Nissan Frontier King Cab is in year 13 of 18 using the 6x114.3 pattern (2007–2024). Wheels from any 2007–2024 Nissan Frontier King Cab are cross-compatible with the 2019 model. Across its full production run (1998–2024), the Frontier King Cab has also used: 6x139.7.
Nissan Frontier King Cab Bolt Pattern by Year
The table below shows how the Frontier King Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x139.7 | 100.0 | 40 |
| 1999 | 6x139.7 | 100.0 | 40 |
| 2000 | 6x139.7 | 100.0 | 40 |
| 2001 | 6x139.7 | 100.0 | 40 |
| 2002 | 6x139.7 | 100.0 | 40 |
| 2003 | 6x139.7 | 100.0 | 40 |
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| ▸ 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2019 Nissan Frontier King Cab
For the 2019 Nissan Frontier King Cab, the 66.1mm center bore is critical; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The offset is sensitive—sticking close to the factory 30mm offset is recommended to avoid rubbing or suspension interference. Always verify lug nut thread pitch (12x1.25) and seat type (cone seat) to match the wheel; using incorrect lug nuts can lead to wheel detachment. Wheels from 2007–2024 Frontier King Cab models are cross-compatible, but double-check specifications.
Historical Fitment Data Reference
In our dataset, Nissan Frontier King Cab appears from 1998 to 2024 (27 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 66.1mm without hub-centric rings to prevent vibrations.
- ✅ Check that aftermarket wheels clear the brake calipers, as some designs may interfere.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Nissan Frontier King Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 Nissan Frontier King Cab?
The 2019 Nissan Frontier King Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier King Cab have the same bolt pattern as the 2019?
The Nissan Frontier King Cab uses the 6x114.3 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
Will wheels from another Nissan fit my 2019 Frontier King Cab?
Only if they share the exact same 6x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 66.1mm.
What is the center bore of a 2019 Nissan Frontier King Cab?
The factory center bore (hub bore) for the 2019 Nissan Frontier King Cab is 66.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 2019 Nissan Frontier King Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Can I use spacers on my 2019 Nissan Frontier King Cab?
Yes, but ensure the wheel spacers match the 6x114.3 bolt pattern and 66.1mm center bore. Also verify that you have enough thread engagement for your 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset