2016 Nissan Frontier King Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2016 Nissan Frontier King Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 66.1 mm |
| Offset (ET) | 30 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2016 Frontier King Cab — Year-Specific Fitment Context
The 2016 Nissan Frontier King Cab is in year 10 of 18 using the 6x114.3 pattern (2007–2024). Wheels from any 2007–2024 Nissan Frontier King Cab are cross-compatible with the 2016 model. Across its full production run (1998–2024), the Frontier King Cab has also used: 6x139.7.
Nissan Frontier King Cab Bolt Pattern by Year
The table below shows how the Frontier King Cab's wheel specifications have changed over the years. The 2016 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1998 | 6x139.7 | 100.0 | 40 |
| 1999 | 6x139.7 | 100.0 | 40 |
| 2000 | 6x139.7 | 100.0 | 40 |
| 2001 | 6x139.7 | 100.0 | 40 |
| 2002 | 6x139.7 | 100.0 | 40 |
| 2003 | 6x139.7 | 100.0 | 40 |
| 2004 | 6x139.7 | 100.0 | 40 |
| 2005 | 6x139.7 | 100.0 | 40 |
| 2006 | 6x139.7 | 100.0 | 40 |
| 2007 | 6x114.3 | 66.1 | 30 |
| 2008 | 6x114.3 | 66.1 | 30 |
| 2009 | 6x114.3 | 66.1 | 30 |
| 2010 | 6x114.3 | 66.1 | 30 |
| 2011 | 6x114.3 | 66.1 | 30 |
| 2012 | 6x114.3 | 66.1 | 30 |
| 2013 | 6x114.3 | 66.1 | 30 |
| 2014 | 6x114.3 | 66.1 | 30 |
| 2015 | 6x114.3 | 66.1 | 30 |
| ▸ 2016 | 6x114.3 | 66.1 | 30 |
| 2017 | 6x114.3 | 66.1 | 45 |
| 2018 | 6x114.3 | 66.1 | 45 |
| 2019 | 6x114.3 | 66.1 | 30 |
| 2020 | 6x114.3 | 66.1 | 30 |
| 2021 | 6x114.3 | 66.1 | 30 |
| 2022 | 6x114.3 | 66.1 | 30 |
| 2023 | 6x114.3 | 66.1 | 30 |
| 2024 | 6x114.3 | 66.1 | 30 |
6x114.3 Pattern Context
This bolt pattern appears on 138 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 6x114.3:
Expert Buying Guide for 2016 Nissan Frontier King Cab
The 2016 Nissan Frontier King Cab uses a 6x114.3 bolt pattern with a 66.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to ensure proper load distribution and prevent vibrations. The factory offset is 30mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always verify lug nut compatibility: 12x1.25 thread pitch with conical (60-degree) or ball seat, depending on wheel design. Never reuse factory lug nuts with aftermarket wheels unless seating matches. Re-torque after 50-100 miles. Wheels from 2007–2024 Frontier King Cab models are direct fit.
Historical Fitment Data Reference
In our dataset, Nissan Frontier King Cab appears from 1998 to 2024 (27 model years). Across model years, this model appears with 2 bolt patterns (6x114.3, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 15.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings (66.1mm ID to aftermarket bore) to avoid vibrations and center the wheel properly.
- ✅ Stick to offsets between 20mm and 40mm to maintain factory suspension geometry and avoid rubbing.
- ✅ Re-torque lug nuts to 85-105 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2016 Nissan Frontier King Cab — Frequently Asked Questions
What is the bolt pattern for a 2016 Nissan Frontier King Cab?
The 2016 Nissan Frontier King Cab uses a 6x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 66.1mm and the offset is 30mm.
What other years of Nissan Frontier King Cab have the same bolt pattern as the 2016?
The Nissan Frontier King Cab uses the 6x114.3 pattern from 2007 through 2024. Wheels from any of these model years are dimensionally compatible with the 2016, provided the offset and center bore also match.
What is the PCD for a 2016 Nissan Frontier King Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2016 Frontier King Cab, the PCD is 6x114.3.
What does 30mm offset mean for the 2016 Frontier King Cab?
An offset of 30mm means the wheel's mounting surface is 30mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Nissan.
Can I put aftermarket wheels on my 2016 Nissan Frontier King Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x114.3 bolt pattern, an offset near 30mm, and a center bore of at least 66.1mm (using hub rings if larger).
What lug nut size does the 2016 Nissan Frontier King Cab use?
The 2016 Nissan Frontier King Cab uses N 12x1.25 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset