1999 Plymouth Grand Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1999 Plymouth Grand Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1999 Grand Voyager — Year-Specific Fitment Context
The 1999 Plymouth Grand Voyager is in year 8 of 9 using the 5x114.3 pattern (1992–2000). Wheels from any 1992–2000 Plymouth Grand Voyager are cross-compatible with the 1999 model.
Plymouth Grand Voyager Bolt Pattern by Year
The table below shows how the Grand Voyager's wheel specifications have changed over the years. The 1999 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1999 Plymouth Grand Voyager
For your 1999 Plymouth Grand Voyager, the bolt pattern is 5x114.3mm, but the critical spec is the center bore: 71.5mm. Aftermarket wheels often have a larger bore (73.1mm common), requiring hub-centric rings to prevent vibration and ensure load is on the hub, not the lugs. Offset is sensitive; stock is 40mm. Sticking within ±5mm is safe; going too far (e.g., 20mm) can cause rubbing or bearing wear. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat or shank-style nuts—they can loosen or damage the wheel. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Plymouth Grand Voyager appears from 1992 to 2000 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels from 2001+ Grand Voyagers; they switched to a 5x100mm pattern and won't fit.
- ✅ Check for clearance with the brake calipers when using wheels with offset below 35mm; some aftermarket designs may contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1999 Plymouth Grand Voyager — Frequently Asked Questions
What is the bolt pattern for a 1999 Plymouth Grand Voyager?
The 1999 Plymouth Grand Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Plymouth Grand Voyager have the same bolt pattern as the 1999?
The Plymouth Grand Voyager uses the 5x114.3 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 1999, provided the offset and center bore also match.
Why is matching the 71.5mm center bore important for the 1999 Grand Voyager?
The 71.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I use spacers on my 1999 Plymouth Grand Voyager?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Can I put aftermarket wheels on my 1999 Plymouth Grand Voyager?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.5mm (using hub rings if larger).
What lug nut size does the 1999 Plymouth Grand Voyager use?
The 1999 Plymouth Grand Voyager uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset