1997 Plymouth Grand Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1997 Plymouth Grand Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1997 Grand Voyager — Year-Specific Fitment Context
The 1997 Plymouth Grand Voyager is in year 6 of 9 using the 5x114.3 pattern (1992–2000). Wheels from any 1992–2000 Plymouth Grand Voyager are cross-compatible with the 1997 model.
Plymouth Grand Voyager Bolt Pattern by Year
The table below shows how the Grand Voyager's wheel specifications have changed over the years. The 1997 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1997 Plymouth Grand Voyager
For your 1997 Plymouth Grand Voyager, the 5x114.3 bolt pattern is shared across 1992–2000 models, but center bore and offset are critical. The factory center bore is 71.5mm; aftermarket wheels often have a larger bore (73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset should stay near 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Never use ball-seat lug nuts on conical seats, as this can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Plymouth Grand Voyager appears from 1992 to 2000 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95 ft-lb after 50 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 71.5mm.
- ✅ Avoid wheels with offset below 35mm to prevent tire rubbing on suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1997 Plymouth Grand Voyager — Frequently Asked Questions
What is the bolt pattern for a 1997 Plymouth Grand Voyager?
The 1997 Plymouth Grand Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Plymouth Grand Voyager have the same bolt pattern as the 1997?
The Plymouth Grand Voyager uses the 5x114.3 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 1997, provided the offset and center bore also match.
Do 1997 Plymouth Grand Voyagers use lug bolts or lug nuts?
The 1997 Grand Voyager requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Plymouth fit my 1997 Grand Voyager?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
What is the factory wheel offset for a 1997 Plymouth Grand Voyager?
The OEM offset for the 1997 Grand Voyager is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 1997 Plymouth Grand Voyager?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset