1996 Plymouth Grand Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1996 Plymouth Grand Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1996 Grand Voyager — Year-Specific Fitment Context
The 1996 Plymouth Grand Voyager is in year 5 of 9 using the 5x114.3 pattern (1992–2000). Wheels from any 1992–2000 Plymouth Grand Voyager are cross-compatible with the 1996 model.
Plymouth Grand Voyager Bolt Pattern by Year
The table below shows how the Grand Voyager's wheel specifications have changed over the years. The 1996 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1996 Plymouth Grand Voyager
For your 1996 Plymouth Grand Voyager, the correct bolt pattern is 5x114.3, center bore 71.5mm, and offset around 40mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration. The offset is sensitive; staying within ±5mm of 40mm is recommended to avoid rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—conical (60-degree) seats are standard. Avoid ball-seat lug nuts as they can loosen. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Plymouth Grand Voyager appears from 1992 to 2000 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-105 ft-lbs after 50 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 71.5mm.
- ✅ Check for caliper clearance; some aftermarket wheels may require spacers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1996 Plymouth Grand Voyager — Frequently Asked Questions
What is the bolt pattern for a 1996 Plymouth Grand Voyager?
The 1996 Plymouth Grand Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Plymouth Grand Voyager have the same bolt pattern as the 1996?
The Plymouth Grand Voyager uses the 5x114.3 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 1996, provided the offset and center bore also match.
Why is matching the 71.5mm center bore important for the 1996 Grand Voyager?
The 71.5mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
What is the center bore of a 1996 Plymouth Grand Voyager?
The factory center bore (hub bore) for the 1996 Plymouth Grand Voyager is 71.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How tight should I torque the lug nuts on a 1996 Plymouth Grand Voyager?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 1996 Plymouth Grand Voyager use?
The 1996 Plymouth Grand Voyager uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset