1998 Plymouth Grand Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Plymouth Grand Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1998 Grand Voyager — Year-Specific Fitment Context
The 1998 Plymouth Grand Voyager is in year 7 of 9 using the 5x114.3 pattern (1992–2000). Wheels from any 1992–2000 Plymouth Grand Voyager are cross-compatible with the 1998 model.
Plymouth Grand Voyager Bolt Pattern by Year
The table below shows how the Grand Voyager's wheel specifications have changed over the years. The 1998 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1998 Plymouth Grand Voyager
When selecting wheels for your 1998 Plymouth Grand Voyager, the 5x114.3 bolt pattern is standard, but the 71.5mm center bore is critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: the factory 40mm offset maintains suspension geometry and brake clearance. Sticking close to 35-45mm avoids rubbing or poor handling. Always use 12x1.5 lug nuts with the correct seat—factory is conical (60-degree). Never use ball-seat nuts; they can loosen. Re-torque after 50-100 miles. Avoid spacers unless hub-centric; they alter offset and stress bearings.
Historical Fitment Data Reference
In our dataset, Plymouth Grand Voyager appears from 1992 to 2000 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 95-105 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, ensure hub-centric rings match the 71.5mm bore exactly.
- ✅ Check for brake caliper clearance; some 17+ inch wheels may require spacers or grinding.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Plymouth Grand Voyager — Frequently Asked Questions
What is the bolt pattern for a 1998 Plymouth Grand Voyager?
The 1998 Plymouth Grand Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Plymouth Grand Voyager have the same bolt pattern as the 1998?
The Plymouth Grand Voyager uses the 5x114.3 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
Can I put aftermarket wheels on my 1998 Plymouth Grand Voyager?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 40mm, and a center bore of at least 71.5mm (using hub rings if larger).
Do 1998 Plymouth Grand Voyagers use lug bolts or lug nuts?
The 1998 Grand Voyager requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 1998 Plymouth Grand Voyager?
The factory center bore (hub bore) for the 1998 Plymouth Grand Voyager is 71.5mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Will wheels from another Plymouth fit my 1998 Grand Voyager?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset