1993 Plymouth Grand Voyager Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1993 Plymouth Grand Voyager, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 71.5 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
1993 Grand Voyager — Year-Specific Fitment Context
The 1993 Plymouth Grand Voyager is in year 2 of 9 using the 5x114.3 pattern (1992–2000). Wheels from any 1992–2000 Plymouth Grand Voyager are cross-compatible with the 1993 model.
Plymouth Grand Voyager Bolt Pattern by Year
The table below shows how the Grand Voyager's wheel specifications have changed over the years. The 1993 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 1993 Plymouth Grand Voyager
For your 1993 Plymouth Grand Voyager, the 5x114.3 bolt pattern is shared across 1992–2000 models, but the 71.5mm center bore is critical. Aftermarket wheels often have a larger bore; use hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive: stock is 40mm, but +35 to +45mm is acceptable. Exceeding this range may cause rubbing or bearing stress. Always use 12x1.5 lug nuts with the correct seat—factory is cone seat (60-degree). Ball seat or incorrect thread pitch can lead to wheel loss. Re-torque after 50-100 miles.
Historical Fitment Data Reference
In our dataset, Plymouth Grand Voyager appears from 1992 to 2000 (9 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub-centric ring inner diameter matches 71.5mm and outer matches wheel bore.
- ✅ Avoid offset below 35mm; it may cause tire rub on inner fender or suspension components.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1993 Plymouth Grand Voyager — Frequently Asked Questions
What is the bolt pattern for a 1993 Plymouth Grand Voyager?
The 1993 Plymouth Grand Voyager uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 71.5mm and the offset is 40mm.
What other years of Plymouth Grand Voyager have the same bolt pattern as the 1993?
The Plymouth Grand Voyager uses the 5x114.3 pattern from 1992 through 2000. Wheels from any of these model years are dimensionally compatible with the 1993, provided the offset and center bore also match.
Will wheels from another Plymouth fit my 1993 Grand Voyager?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 71.5mm.
How tight should I torque the lug nuts on a 1993 Plymouth Grand Voyager?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 1993 Plymouth Grand Voyager?
The OEM offset for the 1993 Grand Voyager is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 1993 Plymouth Grand Voyager?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 71.5mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset