2003 Suzuki Grand Vitara Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2003 Suzuki Grand Vitara, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 108.0 mm |
| Offset (ET) | 10 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2003 Grand Vitara — Year-Specific Fitment Context
The 2003 Suzuki Grand Vitara is in year 5 of 8 using the 5x139.7 pattern (1999–2006). Wheels from any 1999–2006 Suzuki Grand Vitara are cross-compatible with the 2003 model. Across its full production run (1999–2013), the Grand Vitara has also used: 5x114.3.
Suzuki Grand Vitara Bolt Pattern by Year
The table below shows how the Grand Vitara's wheel specifications have changed over the years. The 2003 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x139.7 | 108.0 | 10 |
| 2000 | 5x139.7 | 108.0 | 10 |
| 2001 | 5x139.7 | 108.0 | 10 |
| 2002 | 5x139.7 | 108.0 | 10 |
| ▸ 2003 | 5x139.7 | 108.0 | 10 |
| 2004 | 5x139.7 | 108.0 | 10 |
| 2005 | 5x139.7 | 108.0 | 10 |
| 2006 | 5x139.7 | 108.0 | 10 |
| 2007 | 5x114.3 | 60.1 | 45 |
| 2008 | 5x114.3 | 60.1 | 45 |
| 2009 | 5x114.3 | 60.1 | 45 |
| 2010 | 5x114.3 | 60.1 | 45 |
| 2011 | 5x114.3 | 60.1 | 45 |
| 2012 | 5x114.3 | 60.1 | 45 |
| 2013 | 5x114.3 | 60.1 | 45 |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2003 Suzuki Grand Vitara
For your 2003 Suzuki Grand Vitara, the 5x139.7 bolt pattern is shared with 1999–2006 models, ensuring cross-compatibility. However, the center bore is 108.0mm, which is larger than many aftermarket wheels. Always use hub-centric rings to prevent vibrations and ensure proper load distribution. The offset is sensitive; the factory offset is 10mm, and deviations beyond ±10mm may cause rubbing or clearance issues. Lug nuts are M12x1.25 with a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen or damage the wheel. Verify that aftermarket wheels have the correct hub bore and lug seat type for safety.
Historical Fitment Data Reference
In our dataset, Suzuki Grand Vitara appears from 1999 to 2013 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid wheels with a center bore smaller than 108.0mm; they will not fit without machining.
- ✅ Check for brake caliper clearance when using wheels with offset less than 0mm or greater than 20mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2003 Suzuki Grand Vitara — Frequently Asked Questions
What is the bolt pattern for a 2003 Suzuki Grand Vitara?
The 2003 Suzuki Grand Vitara uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.0mm and the offset is 10mm.
What other years of Suzuki Grand Vitara have the same bolt pattern as the 2003?
The Suzuki Grand Vitara uses the 5x139.7 pattern from 1999 through 2006. Wheels from any of these model years are dimensionally compatible with the 2003, provided the offset and center bore also match.
What is the center bore of a 2003 Suzuki Grand Vitara?
The factory center bore (hub bore) for the 2003 Suzuki Grand Vitara is 108.0mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2003 Suzuki Grand Vitara?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2003 Grand Vitara, the PCD is 5x139.7.
Can I put aftermarket wheels on my 2003 Suzuki Grand Vitara?
Absolutely. Just ensure the aftermarket wheels have a 5x139.7 bolt pattern, an offset near 10mm, and a center bore of at least 108.0mm (using hub rings if larger).
Can I use spacers on my 2003 Suzuki Grand Vitara?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 108.0mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset