2005 Suzuki Grand Vitara Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2005 Suzuki Grand Vitara, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x139.7 (5x5.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 108.0 mm |
| Offset (ET) | 10 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x139.7 is commonly referred to as 5x5.5" in US Standard.
2005 Grand Vitara — Year-Specific Fitment Context
The 2005 Suzuki Grand Vitara is in year 7 of 8 using the 5x139.7 pattern (1999–2006). Wheels from any 1999–2006 Suzuki Grand Vitara are cross-compatible with the 2005 model. Across its full production run (1999–2013), the Grand Vitara has also used: 5x114.3.
Suzuki Grand Vitara Bolt Pattern by Year
The table below shows how the Grand Vitara's wheel specifications have changed over the years. The 2005 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x139.7 | 108.0 | 10 |
| 2000 | 5x139.7 | 108.0 | 10 |
| 2001 | 5x139.7 | 108.0 | 10 |
| 2002 | 5x139.7 | 108.0 | 10 |
| 2003 | 5x139.7 | 108.0 | 10 |
| 2004 | 5x139.7 | 108.0 | 10 |
| ▸ 2005 | 5x139.7 | 108.0 | 10 |
| 2006 | 5x139.7 | 108.0 | 10 |
| 2007 | 5x114.3 | 60.1 | 45 |
| 2008 | 5x114.3 | 60.1 | 45 |
| 2009 | 5x114.3 | 60.1 | 45 |
| 2010 | 5x114.3 | 60.1 | 45 |
| 2011 | 5x114.3 | 60.1 | 45 |
| 2012 | 5x114.3 | 60.1 | 45 |
| 2013 | 5x114.3 | 60.1 | 45 |
5x139.7 Pattern Context
This bolt pattern appears on 261 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x139.7:
Expert Buying Guide for 2005 Suzuki Grand Vitara
For your 2005 Suzuki Grand Vitara, the bolt pattern is 5x139.7mm, center bore 108.0mm, and offset around 10mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibrations. The offset is sensitive; deviations beyond ±10mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone or ball) to avoid wheel loosening. Re-torque after 50-100 miles. Wheels from 1999-2006 Grand Vitaras are direct fit, but avoid 5x114.3mm patterns from later models.
Historical Fitment Data Reference
In our dataset, Suzuki Grand Vitara appears from 1999 to 2013 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 85-95 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, verify hub bore is at least 108.0mm; use hub-centric rings if larger.
- ✅ Check offset: stock is 10mm; going lower (negative) may cause rubbing on suspension or fenders.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2005 Suzuki Grand Vitara — Frequently Asked Questions
What is the bolt pattern for a 2005 Suzuki Grand Vitara?
The 2005 Suzuki Grand Vitara uses a 5x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 108.0mm and the offset is 10mm.
What other years of Suzuki Grand Vitara have the same bolt pattern as the 2005?
The Suzuki Grand Vitara uses the 5x139.7 pattern from 1999 through 2006. Wheels from any of these model years are dimensionally compatible with the 2005, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2005 Suzuki?
The 2005 Grand Vitara uses a 5x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2005 Suzuki Grand Vitara?
The OEM offset for the 2005 Grand Vitara is typically around 10mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2005 Suzuki Grand Vitara?
Yes, but ensure the wheel spacers match the 5x139.7 bolt pattern and 108.0mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Why is matching the 108.0mm center bore important for the 2005 Grand Vitara?
The 108.0mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset