2008 Suzuki Grand Vitara Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Suzuki Grand Vitara, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2008 Grand Vitara — Year-Specific Fitment Context
The 2008 Suzuki Grand Vitara is in year 2 of 7 using the 5x114.3 pattern (2007–2013). Wheels from any 2007–2013 Suzuki Grand Vitara are cross-compatible with the 2008 model. Across its full production run (1999–2013), the Grand Vitara has also used: 5x139.7.
Suzuki Grand Vitara Bolt Pattern by Year
The table below shows how the Grand Vitara's wheel specifications have changed over the years. The 2008 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x139.7 | 108.0 | 10 |
| 2000 | 5x139.7 | 108.0 | 10 |
| 2001 | 5x139.7 | 108.0 | 10 |
| 2002 | 5x139.7 | 108.0 | 10 |
| 2003 | 5x139.7 | 108.0 | 10 |
| 2004 | 5x139.7 | 108.0 | 10 |
| 2005 | 5x139.7 | 108.0 | 10 |
| 2006 | 5x139.7 | 108.0 | 10 |
| 2007 | 5x114.3 | 60.1 | 45 |
| ▸ 2008 | 5x114.3 | 60.1 | 45 |
| 2009 | 5x114.3 | 60.1 | 45 |
| 2010 | 5x114.3 | 60.1 | 45 |
| 2011 | 5x114.3 | 60.1 | 45 |
| 2012 | 5x114.3 | 60.1 | 45 |
| 2013 | 5x114.3 | 60.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2008 Suzuki Grand Vitara
For the 2008 Suzuki Grand Vitara, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger center bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibrations and ensure proper load transfer. The stock offset is 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.25) and seat type (cone/ball). Improper lug nuts can lead to wheel loosening. Verify that aftermarket wheels are hub-centric or use rings, and check offset carefully.
Historical Fitment Data Reference
In our dataset, Suzuki Grand Vitara appears from 1999 to 2013 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; vibrations and stress on studs may result.
- ✅ If upgrading to larger wheels, verify clearance with suspension components and brake calipers.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Suzuki Grand Vitara — Frequently Asked Questions
What is the bolt pattern for a 2008 Suzuki Grand Vitara?
The 2008 Suzuki Grand Vitara uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.
What other years of Suzuki Grand Vitara have the same bolt pattern as the 2008?
The Suzuki Grand Vitara uses the 5x114.3 pattern from 2007 through 2013. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What does 45mm offset mean for the 2008 Grand Vitara?
An offset of 45mm means the wheel's mounting surface is 45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Suzuki.
Can I use spacers on my 2008 Suzuki Grand Vitara?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
Do 2008 Suzuki Grand Vitaras use lug bolts or lug nuts?
The 2008 Grand Vitara requires N 12x1.25 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
What is the center bore of a 2008 Suzuki Grand Vitara?
The factory center bore (hub bore) for the 2008 Suzuki Grand Vitara is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset