2010 Suzuki Grand Vitara Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Suzuki Grand Vitara, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2010 Grand Vitara — Year-Specific Fitment Context
The 2010 Suzuki Grand Vitara is in year 4 of 7 using the 5x114.3 pattern (2007–2013). Wheels from any 2007–2013 Suzuki Grand Vitara are cross-compatible with the 2010 model. Across its full production run (1999–2013), the Grand Vitara has also used: 5x139.7.
Suzuki Grand Vitara Bolt Pattern by Year
The table below shows how the Grand Vitara's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x139.7 | 108.0 | 10 |
| 2000 | 5x139.7 | 108.0 | 10 |
| 2001 | 5x139.7 | 108.0 | 10 |
| 2002 | 5x139.7 | 108.0 | 10 |
| 2003 | 5x139.7 | 108.0 | 10 |
| 2004 | 5x139.7 | 108.0 | 10 |
| 2005 | 5x139.7 | 108.0 | 10 |
| 2006 | 5x139.7 | 108.0 | 10 |
| 2007 | 5x114.3 | 60.1 | 45 |
| 2008 | 5x114.3 | 60.1 | 45 |
| 2009 | 5x114.3 | 60.1 | 45 |
| ▸ 2010 | 5x114.3 | 60.1 | 45 |
| 2011 | 5x114.3 | 60.1 | 45 |
| 2012 | 5x114.3 | 60.1 | 45 |
| 2013 | 5x114.3 | 60.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2010 Suzuki Grand Vitara
For your 2010 Suzuki Grand Vitara, the 5x114.3 bolt pattern and 60.1mm center bore are critical. Aftermarket wheels often have a larger bore (e.g., 73.1mm), requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset should stay near 45mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use the correct lug nuts: 12x1.25 thread pitch with a conical (60-degree) seat. Flat or ball-seat nuts can loosen or damage the wheel. Re-torque after 50-100 miles. Avoid wheels from pre-2007 models (5x139.7 pattern).
Historical Fitment Data Reference
In our dataset, Suzuki Grand Vitara appears from 1999 to 2013 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50-100 miles of driving.
- ✅ If using aftermarket wheels, install hub-centric rings (60.1mm ID to wheel's bore OD) to prevent vibrations.
- ✅ Check for caliper clearance: some 17" wheels may not clear the front calipers; test fit before purchase.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Suzuki Grand Vitara — Frequently Asked Questions
What is the bolt pattern for a 2010 Suzuki Grand Vitara?
The 2010 Suzuki Grand Vitara uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.
What other years of Suzuki Grand Vitara have the same bolt pattern as the 2010?
The Suzuki Grand Vitara uses the 5x114.3 pattern from 2007 through 2013. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the factory wheel offset for a 2010 Suzuki Grand Vitara?
The OEM offset for the 2010 Grand Vitara is typically around 45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What is the PCD for a 2010 Suzuki Grand Vitara?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Grand Vitara, the PCD is 5x114.3.
How tight should I torque the lug nuts on a 2010 Suzuki Grand Vitara?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.25 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2010 Suzuki?
The 2010 Grand Vitara uses a 5x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset