2011 Suzuki Grand Vitara Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Suzuki Grand Vitara, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.25 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 Grand Vitara — Year-Specific Fitment Context
The 2011 Suzuki Grand Vitara is in year 5 of 7 using the 5x114.3 pattern (2007–2013). Wheels from any 2007–2013 Suzuki Grand Vitara are cross-compatible with the 2011 model. Across its full production run (1999–2013), the Grand Vitara has also used: 5x139.7.
Suzuki Grand Vitara Bolt Pattern by Year
The table below shows how the Grand Vitara's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1999 | 5x139.7 | 108.0 | 10 |
| 2000 | 5x139.7 | 108.0 | 10 |
| 2001 | 5x139.7 | 108.0 | 10 |
| 2002 | 5x139.7 | 108.0 | 10 |
| 2003 | 5x139.7 | 108.0 | 10 |
| 2004 | 5x139.7 | 108.0 | 10 |
| 2005 | 5x139.7 | 108.0 | 10 |
| 2006 | 5x139.7 | 108.0 | 10 |
| 2007 | 5x114.3 | 60.1 | 45 |
| 2008 | 5x114.3 | 60.1 | 45 |
| 2009 | 5x114.3 | 60.1 | 45 |
| 2010 | 5x114.3 | 60.1 | 45 |
| ▸ 2011 | 5x114.3 | 60.1 | 45 |
| 2012 | 5x114.3 | 60.1 | 45 |
| 2013 | 5x114.3 | 60.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Suzuki Grand Vitara
For your 2011 Suzuki Grand Vitara, the bolt pattern is 5x114.3 with a critical center bore of 60.1mm. Aftermarket wheels often have a larger bore, so hub-centric rings (60.1mm ID to wheel bore OD) are mandatory to prevent vibrations and ensure proper load transfer. The factory offset is 45mm; staying within ±5mm is recommended to avoid rubbing or suspension interference. Use only 12x1.25 lug nuts with the correct seat type—factory wheels use a conical (60-degree) seat. Never use ball-seat lug nuts, as they can loosen or damage the wheel. Always torque to manufacturer specs (80-90 ft-lbs) and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Suzuki Grand Vitara appears from 1999 to 2013 (15 model years). Across model years, this model appears with 2 bolt patterns (5x114.3, 5x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 35.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50 miles of driving to account for wheel seating and thermal expansion.
- ✅ Verify wheel bore diameter; if larger than 60.1mm, install hub-centric rings to avoid vibration.
- ✅ Check offset carefully: +45mm is ideal; offsets below +40mm may cause tire rub on fenders or suspension.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Suzuki Grand Vitara — Frequently Asked Questions
What is the bolt pattern for a 2011 Suzuki Grand Vitara?
The 2011 Suzuki Grand Vitara uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 45mm.
What other years of Suzuki Grand Vitara have the same bolt pattern as the 2011?
The Suzuki Grand Vitara uses the 5x114.3 pattern from 2007 through 2013. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
Can I use spacers on my 2011 Suzuki Grand Vitara?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.25 hardware.
What is the PCD for a 2011 Suzuki Grand Vitara?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 Grand Vitara, the PCD is 5x114.3.
Will wheels from another Suzuki fit my 2011 Grand Vitara?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
Why is matching the 60.1mm center bore important for the 2011 Grand Vitara?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset