2006 Suzuki Reno Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Suzuki Reno, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 Reno — Year-Specific Fitment Context
The 2006 Suzuki Reno is in year 2 of 4 using the 4x114.3 pattern (2005–2008). Wheels from any 2005–2008 Suzuki Reno are cross-compatible with the 2006 model.
Suzuki Reno Bolt Pattern by Year
The table below shows how the Reno's wheel specifications have changed over the years. The 2006 model year is highlighted.
Fitment Notes
The 2006 Suzuki Reno has a bolt pattern of 4x114.3.
This means it is a 4 lug pattern with a circle diameter of 114.3mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Suzuki Reno appears from 2005 to 2008 (4 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
2006 Suzuki Reno — Frequently Asked Questions
What is the bolt pattern for a 2006 Suzuki Reno?
The 2006 Suzuki Reno uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Suzuki Reno have the same bolt pattern as the 2006?
The Suzuki Reno uses the 4x114.3 pattern from 2005 through 2008. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Will wheels from another Suzuki fit my 2006 Reno?
Only if they share the exact same 4x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 57.1mm.
Why is matching the 57.1mm center bore important for the 2006 Reno?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2006 Suzuki?
The 2006 Reno uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the center bore of a 2006 Suzuki Reno?
The factory center bore (hub bore) for the 2006 Suzuki Reno is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Fitment Checklist Before You Buy Wheels
- Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Suzuki Reno is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2005-2008 (4 model years).
- Observed bolt-pattern variants: 1 (4x114.3).
- Observed total offset span across years: 0.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2006 Suzuki Reno, please report it via our About page contact so we can verify and update this record.