2008 Suzuki Reno Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2008 Suzuki Reno, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2008 Reno — Year-Specific Fitment Context
The 2008 model year is the final year of the Suzuki Reno's 4x114.3 bolt pattern run (since 2005). Wheels from any 2005–2008 Suzuki Reno are cross-compatible with the 2008 model.
Suzuki Reno Bolt Pattern by Year
The table below shows how the Reno's wheel specifications have changed over the years. The 2008 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2008 Suzuki Reno
For your 2008 Suzuki Reno, the bolt pattern is 4x114.3mm with a center bore of 57.1mm. When selecting aftermarket wheels, ensure they match the bolt pattern and use hub-centric rings (57.1mm to wheel bore) to prevent vibrations. The offset is critical: stock is 40mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree). Never use ball-seat lug nuts on conical wheels—this can lead to wheel loss. After installation, re-torque lug nuts to 80-90 ft-lbs after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Suzuki Reno appears from 2005 to 2008 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80-90 ft-lbs after 50 miles, then periodically check.
- ✅ Avoid wheels with offset below 35mm or above 45mm to prevent rubbing on struts or fenders.
- ✅ Verify wheel bore diameter; if larger than 57.1mm, use hub-centric rings to avoid vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2008 Suzuki Reno — Frequently Asked Questions
What is the bolt pattern for a 2008 Suzuki Reno?
The 2008 Suzuki Reno uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Suzuki Reno have the same bolt pattern as the 2008?
The Suzuki Reno uses the 4x114.3 pattern from 2005 through 2008. Wheels from any of these model years are dimensionally compatible with the 2008, provided the offset and center bore also match.
What is the factory wheel offset for a 2008 Suzuki Reno?
The OEM offset for the 2008 Reno is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 57.1mm center bore important for the 2008 Reno?
The 57.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
How do I measure the bolt pattern on my 2008 Suzuki?
The 2008 Reno uses a 4x114.3 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2008 Suzuki Reno?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2008 Reno, the PCD is 4x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset