2007 Suzuki Reno Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2007 Suzuki Reno, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 4x114.3 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 57.1 mm |
| Offset (ET) | 40 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2007 Reno — Year-Specific Fitment Context
The 2007 Suzuki Reno is in year 3 of 4 using the 4x114.3 pattern (2005–2008). Wheels from any 2005–2008 Suzuki Reno are cross-compatible with the 2007 model.
Suzuki Reno Bolt Pattern by Year
The table below shows how the Reno's wheel specifications have changed over the years. The 2007 model year is highlighted.
4x114.3 Pattern Context
This bolt pattern appears on 169 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 4x114.3:
Expert Buying Guide for 2007 Suzuki Reno
For your 2007 Suzuki Reno, the 4x114.3 bolt pattern is shared with 2005-2008 models. The 57.1mm center bore is critical: aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset is sensitive; stock is 40mm. Sticking within ±5mm is safe, but deviations affect handling and bearing life. Always use lug nuts with the correct thread pitch (12x1.50) and seat type—factory wheels use conical seats. Using incorrect lug nuts can cause wheel loosening. Verify wheel load rating meets or exceeds OEM specs.
Historical Fitment Data Reference
In our dataset, Suzuki Reno appears from 2005 to 2008 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to ensure proper seating.
- ✅ Avoid using universal fit wheels without hub-centric rings; they can cause vibration and stress on studs.
- ✅ Check that aftermarket wheels clear the brake calipers and suspension components, especially with lower offsets.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2007 Suzuki Reno — Frequently Asked Questions
What is the bolt pattern for a 2007 Suzuki Reno?
The 2007 Suzuki Reno uses a 4x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 57.1mm and the offset is 40mm.
What other years of Suzuki Reno have the same bolt pattern as the 2007?
The Suzuki Reno uses the 4x114.3 pattern from 2005 through 2008. Wheels from any of these model years are dimensionally compatible with the 2007, provided the offset and center bore also match.
What is the factory wheel offset for a 2007 Suzuki Reno?
The OEM offset for the 2007 Reno is typically around 40mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What lug nut size does the 2007 Suzuki Reno use?
The 2007 Suzuki Reno uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2007 Suzuki Reno?
The factory center bore (hub bore) for the 2007 Suzuki Reno is 57.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
What is the PCD for a 2007 Suzuki Reno?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2007 Reno, the PCD is 4x114.3.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset