2022 Toyota Highlander Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2022 Toyota Highlander Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2022 Highlander Hybrid — Year-Specific Fitment Context
The 2022 Toyota Highlander Hybrid is in year 6 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Toyota Highlander Hybrid are cross-compatible with the 2022 model.
Toyota Highlander Hybrid Bolt Pattern by Year
The table below shows how the Highlander Hybrid's wheel specifications have changed over the years. The 2022 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2022 Toyota Highlander Hybrid
For your 2022 Toyota Highlander Hybrid, the bolt pattern is 5x114.3mm with a critical center bore of 60.1mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 35-45mm; deviating can cause rubbing or suspension damage. Always use the correct lug nuts: 12x1.5 thread pitch with a conical (60-degree) seat. Never use ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles. Wheels from 2017-2024 Highlander Hybrids are direct fit.
Historical Fitment Data Reference
In our dataset, Toyota Highlander Hybrid appears from 2017 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a bore larger than 60.1mm to avoid vibrations.
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles of driving.
- ✅ Verify offset is between 35-45mm; lower offsets may rub the fender, higher offsets may contact the brake caliper.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2022 Toyota Highlander Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2022 Toyota Highlander Hybrid?
The 2022 Toyota Highlander Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Highlander Hybrid have the same bolt pattern as the 2022?
The Toyota Highlander Hybrid uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2022, provided the offset and center bore also match.
What does 35-45mm offset mean for the 2022 Highlander Hybrid?
An offset of 35-45mm means the wheel's mounting surface is 35-45mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What lug nut size does the 2022 Toyota Highlander Hybrid use?
The 2022 Toyota Highlander Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
How tight should I torque the lug nuts on a 2022 Toyota Highlander Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the factory wheel offset for a 2022 Toyota Highlander Hybrid?
The OEM offset for the 2022 Highlander Hybrid is typically around 35-45mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset