2026 Toyota Highlander Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Toyota Highlander Hybrid is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2026 Toyota Highlander Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2026 Highlander Hybrid — Year-Specific Fitment Context
The 2026 model year is the final year of the Toyota Highlander Hybrid's 5x114.3 bolt pattern run (since 2017). Wheels from any 2017–2026 Toyota Highlander Hybrid are cross-compatible with the 2026 model.
Toyota Highlander Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Toyota Highlander Hybrid (2017–2026) Bolt Pattern & Generation Guide →
The table below shows how the Highlander Hybrid's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Toyota Highlander Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2026 Toyota Highlander Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2026 Genesis GV60 | 67.1 mm | 67.1mm → 60.1mm |
45 |
| 2025 Genesis GV70 | 67.1 mm | 67.1mm → 60.1mm |
35-45 |
| 2025 Genesis GV80 | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2025 Genesis GV80 Coupe | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2005 Honda Accord | 64.1 mm | 64.1mm → 60.1mm |
52 |
| 2024 Honda Accord Hybrid | 64.1 mm | 64.1mm → 60.1mm |
45 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Toyota Highlander Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2026 Toyota Highlander Hybrid?
The 2026 Toyota Highlander Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Highlander Hybrid have the same bolt pattern as the 2026?
The Toyota Highlander Hybrid uses the 5x114.3 pattern from 2017 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What is the PCD for a 2026 Toyota Highlander Hybrid?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2026 Highlander Hybrid, the PCD is 5x114.3.
Will wheels from another Toyota fit my 2026 Highlander Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
What is the center bore of a 2026 Toyota Highlander Hybrid?
The factory center bore (hub bore) for the 2026 Toyota Highlander Hybrid is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Can I use spacers on my 2026 Toyota Highlander Hybrid?
Yes, but ensure the wheel spacers match the 5x114.3 bolt pattern and 60.1mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →