2025 Toyota Highlander Hybrid Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2025 Toyota Highlander Hybrid is 5x114.3 (5x4.5"). It has a center bore of 60.1 mm, an offset range of 35-45, and utilizes 12x1.5 (Flat/Mag seat, 21mm hex) fasteners tightened to 80 ft-lbs (108 Nm).
2025 Toyota Highlander Hybrid Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Center Bore (Hub Bore) | 60.1 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Flat / Mag Seat (Washer) |
| Lug Wrench / Socket Hex Size | 21mm |
| Wheel Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2025 Highlander Hybrid — Year-Specific Fitment Context
The 2025 Toyota Highlander Hybrid is in year 9 of 10 using the 5x114.3 pattern (2017–2026). Wheels from any 2017–2026 Toyota Highlander Hybrid are cross-compatible with the 2025 model.
Toyota Highlander Hybrid Bolt Pattern by Year
Looking for all generations? View the complete Toyota Highlander Hybrid (2017–2026) Bolt Pattern & Generation Guide →
The table below shows how the Highlander Hybrid's wheel specifications have changed over the years. The 2025 model year is highlighted.
2025 Toyota Highlander Hybrid Wheel Interchange & Donor Fitment Guide (5x114.3)
The 5x114.3 bolt pattern is shared by 3311 vehicles in our database (very common). For safe wheel swaps on the 2025 Toyota Highlander Hybrid, donor rims must match the 5x114.3 PCD and have a center bore of at least 60.1 mm:
DIRECT HUB MATCH Same 5x114.3 Pattern & Exact 60.1mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Lexus ES | 60.1 mm (Exact) | 40 | 12x1.5 (Flat) |
| 2020 Lexus GS | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat/Mag) |
| 2007 Lexus GX | 60.1 mm (Exact) | 25 | N 12x1.50 (Flat/Mag) |
| 2025 Lexus IS | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
| 2025 Lexus NX | 60.1 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Lexus RC | 60.1 mm (Exact) | 35-45 | 12x1.5 (Flat) |
HUB RING FITMENT Same 5x114.3 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 2013 Hyundai Santa Fe | 66.1 mm | 66.1mm → 60.1mm |
41 |
| 2024 Hyundai Santa Fe Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2023 Hyundai Santa Fe Plug-in Hybrid | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2018 Hyundai Santa Fe Sport | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2019 Hyundai Santa Fe XL | 67.1 mm | 67.1mm → 60.1mm |
35-50 |
| 2006 Hyundai Sonata | 67.1 mm | 67.1mm → 60.1mm |
46 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2025 Toyota Highlander Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2025 Toyota Highlander Hybrid?
The 2025 Toyota Highlander Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Highlander Hybrid have the same bolt pattern as the 2025?
The Toyota Highlander Hybrid uses the 5x114.3 pattern from 2017 through 2026. Wheels from any of these model years are dimensionally compatible with the 2025, provided the offset and center bore also match.
Can I put aftermarket wheels on my 2025 Toyota Highlander Hybrid?
Absolutely. Just ensure the aftermarket wheels have a 5x114.3 bolt pattern, an offset near 35-45mm, and a center bore of at least 60.1mm (using hub rings if larger).
What is the center bore of a 2025 Toyota Highlander Hybrid?
The factory center bore (hub bore) for the 2025 Toyota Highlander Hybrid is 60.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2025 Toyota Highlander Hybrids use lug bolts or lug nuts?
The 2025 Highlander Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Why is matching the 60.1mm center bore important for the 2025 Highlander Hybrid?
The 60.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →