2019 Toyota Highlander Hybrid Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota Highlander Hybrid, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 60.1 mm |
| Offset (ET) | 35-45 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2019 Highlander Hybrid — Year-Specific Fitment Context
The 2019 Toyota Highlander Hybrid is in year 3 of 8 using the 5x114.3 pattern (2017–2024). Wheels from any 2017–2024 Toyota Highlander Hybrid are cross-compatible with the 2019 model.
Toyota Highlander Hybrid Bolt Pattern by Year
The table below shows how the Highlander Hybrid's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2019 Toyota Highlander Hybrid
The 2019 Toyota Highlander Hybrid uses a 5x114.3 bolt pattern with a 60.1mm center bore. When selecting aftermarket wheels, hub-centric rings are mandatory to match the exact bore, preventing vibrations and ensuring proper load distribution. Offset must stay within 35-45mm; deviations risk rubbing on suspension or fenders. Always use 12x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats; aftermarket wheels may require ball or conical seats. Verify lug nut compatibility to avoid wheel loosening. For safety, re-torque lug nuts after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Highlander Hybrid appears from 2017 to 2024 (8 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 80.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 76 ft-lbs after 50-100 miles, as wheels settle.
- ✅ Avoid using universal fit wheels without hub-centric rings; they cause vibration and stress on studs.
- ✅ Check inner clearance for TPMS sensors and brake calipers, especially with lower offsets near 35mm.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota Highlander Hybrid — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota Highlander Hybrid?
The 2019 Toyota Highlander Hybrid uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 60.1mm and the offset is 35-45mm.
What other years of Toyota Highlander Hybrid have the same bolt pattern as the 2019?
The Toyota Highlander Hybrid uses the 5x114.3 pattern from 2017 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
What lug nut size does the 2019 Toyota Highlander Hybrid use?
The 2019 Toyota Highlander Hybrid uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Do 2019 Toyota Highlander Hybrids use lug bolts or lug nuts?
The 2019 Highlander Hybrid requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Will wheels from another Toyota fit my 2019 Highlander Hybrid?
Only if they share the exact same 5x114.3 bolt pattern, a compatible offset, and a center bore equal to or larger than 60.1mm.
How tight should I torque the lug nuts on a 2019 Toyota Highlander Hybrid?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset