2019 Toyota Tundra Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Toyota Tundra Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 Tundra Double Cab — Year-Specific Fitment Context
The 2019 Toyota Tundra Double Cab is in year 13 of 15 using the 5x150 pattern (2007–2021). Wheels from any 2007–2021 Toyota Tundra Double Cab are cross-compatible with the 2019 model. Across its full production run (2004–2024), the Tundra Double Cab has also used: 6x139.7.
Toyota Tundra Double Cab Bolt Pattern by Year
The table below shows how the Tundra Double Cab's wheel specifications have changed over the years. The 2019 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| ▸ 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2019 Toyota Tundra Double Cab
When selecting aftermarket wheels for the 2019 Toyota Tundra Double Cab, the 5x150 bolt pattern and 110.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or suspension interference. Always use lug nuts with the correct 14x1.5 thread pitch and a 60-degree conical seat (common for Toyota). Avoid ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles to maintain clamping force.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Double Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Use hub-centric rings if aftermarket wheels have a bore >110.1mm to avoid vibrations.
- ✅ Stick to offsets between 50mm and 70mm to prevent rubbing on the upper control arm or fender.
- ✅ Re-torque lug nuts to 154 Nm (114 lb-ft) after 50-100 miles of driving.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Toyota Tundra Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2019 Toyota Tundra Double Cab?
The 2019 Toyota Tundra Double Cab uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra Double Cab have the same bolt pattern as the 2019?
The Toyota Tundra Double Cab uses the 5x150 pattern from 2007 through 2021. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Toyota?
The 2019 Tundra Double Cab uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2019 Toyota Tundra Double Cab?
The OEM offset for the 2019 Tundra Double Cab is typically around 60mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
What does 60mm offset mean for the 2019 Tundra Double Cab?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
Will wheels from another Toyota fit my 2019 Tundra Double Cab?
Only if they share the exact same 5x150 bolt pattern, a compatible offset, and a center bore equal to or larger than 110.1mm.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset