2004 Toyota Tundra Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2004 Toyota Tundra Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2004 Tundra Double Cab — Year-Specific Fitment Context
The 2004 model year marks the beginning of the Toyota Tundra Double Cab's 6x139.7 bolt pattern era, which continued through 2024 (21 consecutive years). Wheels from any 2004–2024 Toyota Tundra Double Cab are cross-compatible with the 2004 model. Across its full production run (2004–2024), the Tundra Double Cab has also used: 5x150.
Toyota Tundra Double Cab Bolt Pattern by Year
The table below shows how the Tundra Double Cab's wheel specifications have changed over the years. The 2004 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| ▸ 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2004 Toyota Tundra Double Cab
For the 2004 Toyota Tundra Double Cab, the 6x139.7 bolt pattern and 106.1mm center bore are critical. Aftermarket wheels often have a larger center bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. The factory offset is 15mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut compatibility: 12x1.5 thread pitch with a conical (60-degree) seat. Using incorrect lug nuts (e.g., ball seat) can lead to wheel loosening. Re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Double Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 106.1mm.
- ✅ Stick to offsets between 10mm and 20mm to avoid rubbing on suspension or fenders.
- ✅ Re-torque lug nuts to 83 ft-lbs after 50-100 miles, and check periodically.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2004 Toyota Tundra Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2004 Toyota Tundra Double Cab?
The 2004 Toyota Tundra Double Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 15mm.
What other years of Toyota Tundra Double Cab have the same bolt pattern as the 2004?
The Toyota Tundra Double Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2004, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2004 Toyota Tundra Double Cab?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2004 Toyota Tundra Double Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2004 Tundra Double Cab, the PCD is 6x139.7.
What does 15mm offset mean for the 2004 Tundra Double Cab?
An offset of 15mm means the wheel's mounting surface is 15mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the factory wheel offset for a 2004 Toyota Tundra Double Cab?
The OEM offset for the 2004 Tundra Double Cab is typically around 15mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset