2010 Toyota Tundra Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Toyota Tundra Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2010 Tundra Double Cab — Year-Specific Fitment Context
The 2010 Toyota Tundra Double Cab is in year 4 of 15 using the 5x150 pattern (2007–2021). Wheels from any 2007–2021 Toyota Tundra Double Cab are cross-compatible with the 2010 model. Across its full production run (2004–2024), the Tundra Double Cab has also used: 6x139.7.
Toyota Tundra Double Cab Bolt Pattern by Year
The table below shows how the Tundra Double Cab's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| ▸ 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2010 Toyota Tundra Double Cab
When selecting wheels for your 2010 Toyota Tundra Double Cab, the 5x150 bolt pattern is shared with 2007–2021 models, ensuring cross-compatibility. The 110.1mm center bore requires hub-centric rings for aftermarket wheels to prevent vibration and ensure proper load distribution. Offset is critical: the factory 60mm offset maintains suspension geometry and tire clearance; deviations beyond ±10mm may cause rubbing or bearing stress. Always use 14x1.5 lug nuts with the correct seat type—factory wheels use conical (60-degree) seats; aftermarket wheels may require ball or shank-style nuts. Improper seating can lead to wheel loosening. Re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Double Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings (110.1mm to aftermarket bore) to avoid vibration and hub damage.
- ✅ Stick to offset within 50-70mm to prevent rubbing on suspension or body panels.
- ✅ Re-torque lug nuts to 83 ft-lb after 50 miles, then periodically; use a torque wrench to avoid over-tightening.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Toyota Tundra Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2010 Toyota Tundra Double Cab?
The 2010 Toyota Tundra Double Cab uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra Double Cab have the same bolt pattern as the 2010?
The Toyota Tundra Double Cab uses the 5x150 pattern from 2007 through 2021. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Toyota Tundra Double Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 Tundra Double Cab, the PCD is 5x150.
Why is matching the 110.1mm center bore important for the 2010 Tundra Double Cab?
The 110.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Can I put aftermarket wheels on my 2010 Toyota Tundra Double Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x150 bolt pattern, an offset near 60mm, and a center bore of at least 110.1mm (using hub rings if larger).
Do 2010 Toyota Tundra Double Cabs use lug bolts or lug nuts?
The 2010 Tundra Double Cab requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset