2009 Toyota Tundra Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2009 Toyota Tundra Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x150 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 110.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2009 Tundra Double Cab — Year-Specific Fitment Context
The 2009 Toyota Tundra Double Cab is in year 3 of 15 using the 5x150 pattern (2007–2021). Wheels from any 2007–2021 Toyota Tundra Double Cab are cross-compatible with the 2009 model. Across its full production run (2004–2024), the Tundra Double Cab has also used: 6x139.7.
Toyota Tundra Double Cab Bolt Pattern by Year
The table below shows how the Tundra Double Cab's wheel specifications have changed over the years. The 2009 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| ▸ 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
5x150 Pattern Context
This bolt pattern appears on 93 vehicles in our current database and is considered uncommon.
Examples of other vehicles using 5x150:
Expert Buying Guide for 2009 Toyota Tundra Double Cab
The 2009 Toyota Tundra Double Cab uses a 5x150 bolt pattern with a 110.1mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (14x1.5) and seat type (cone seat) to avoid wheel loosening. Wheels from 2007–2021 Tundra Double Cab models are cross-compatible. Note that earlier Tundra models (2004–2006) use a 6x139.7 pattern and are not compatible.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Double Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles of driving to ensure proper seating.
- ✅ Avoid using wheels with a center bore larger than 110.1mm without hub-centric rings to prevent vibration.
- ✅ Check for brake caliper clearance when using wheels with offset less than 50mm or greater than 70mm.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
- ⚠️ This bolt pattern is less common in our dataset. Verify wheel availability and hub specs before ordering.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2009 Toyota Tundra Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2009 Toyota Tundra Double Cab?
The 2009 Toyota Tundra Double Cab uses a 5x150 bolt pattern (also called lug pattern or PCD). The center bore is 110.1mm and the offset is 60mm.
What other years of Toyota Tundra Double Cab have the same bolt pattern as the 2009?
The Toyota Tundra Double Cab uses the 5x150 pattern from 2007 through 2021. Wheels from any of these model years are dimensionally compatible with the 2009, provided the offset and center bore also match.
What does 60mm offset mean for the 2009 Tundra Double Cab?
An offset of 60mm means the wheel's mounting surface is 60mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Toyota.
What is the PCD for a 2009 Toyota Tundra Double Cab?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2009 Tundra Double Cab, the PCD is 5x150.
Can I put aftermarket wheels on my 2009 Toyota Tundra Double Cab?
Absolutely. Just ensure the aftermarket wheels have a 5x150 bolt pattern, an offset near 60mm, and a center bore of at least 110.1mm (using hub rings if larger).
How do I measure the bolt pattern on my 2009 Toyota?
The 2009 Tundra Double Cab uses a 5x150 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset