2006 Toyota Tundra Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Toyota Tundra Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 106.1 mm |
| Offset (ET) | 15 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2006 Tundra Double Cab — Year-Specific Fitment Context
The 2006 Toyota Tundra Double Cab is in year 3 of 21 using the 6x139.7 pattern (2004–2024). Wheels from any 2004–2024 Toyota Tundra Double Cab are cross-compatible with the 2006 model. Important: starting in 2007, Toyota switched to 5x150 — those wheels will not fit the 2006 model. Across its full production run (2004–2024), the Tundra Double Cab has also used: 5x150.
Toyota Tundra Double Cab Bolt Pattern by Year
The table below shows how the Tundra Double Cab's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| ▸ 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| 2024 | 6x139.7 | 95.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2006 Toyota Tundra Double Cab
For your 2006 Toyota Tundra Double Cab, the bolt pattern is 6x139.7mm with a center bore of 106.1mm. When selecting aftermarket wheels, hub-centric rings are essential to match the bore precisely, preventing vibrations and ensuring proper load distribution. The recommended offset is 15mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brake components. Always use lug nuts with the correct thread pitch (12x1.5) and seat type—either conical (60-degree) or ball seat—to avoid wheel loosening. Never reuse old lug nuts; torque to manufacturer specs and re-torque after 50 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Double Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 83 ft-lbs after 50 miles, then periodically check.
- ✅ Avoid wheels from 2007+ Tundra (5x150); only 2004-2006 and 2022+ (6x139.7) fit.
- ✅ Use hub-centric rings (106.1mm ID) to prevent vibration; verify ring material (aluminum preferred).
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Toyota Tundra Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2006 Toyota Tundra Double Cab?
The 2006 Toyota Tundra Double Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 106.1mm and the offset is 15mm.
What other years of Toyota Tundra Double Cab have the same bolt pattern as the 2006?
The Toyota Tundra Double Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
Will 2007 Toyota Tundra Double Cab wheels fit a 2006 model?
No. The 2007 Toyota Tundra Double Cab switched to a 5x150 bolt pattern, which is not compatible with the 2006 model's 6x139.7. Using mismatched patterns is unsafe.
What lug nut size does the 2006 Toyota Tundra Double Cab use?
The 2006 Toyota Tundra Double Cab uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the center bore of a 2006 Toyota Tundra Double Cab?
The factory center bore (hub bore) for the 2006 Toyota Tundra Double Cab is 106.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
How do I measure the bolt pattern on my 2006 Toyota?
The 2006 Tundra Double Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset