2024 Toyota Tundra Double Cab Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2024 Toyota Tundra Double Cab, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 6x139.7 (6x5.5") |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 95.1 mm |
| Offset (ET) | 60 |
| Torque Specs | 100 ft-lbs (135 Nm) |
Imperial Match: 6x139.7 is commonly referred to as 6x5.5" in US Standard.
2024 Tundra Double Cab — Year-Specific Fitment Context
The 2024 model year is the final year of the Toyota Tundra Double Cab's 6x139.7 bolt pattern run (since 2004). Wheels from any 2004–2024 Toyota Tundra Double Cab are cross-compatible with the 2024 model. Across its full production run (2004–2024), the Tundra Double Cab has also used: 5x150.
Toyota Tundra Double Cab Bolt Pattern by Year
The table below shows how the Tundra Double Cab's wheel specifications have changed over the years. The 2024 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2004 | 6x139.7 | 106.1 | 15 |
| 2005 | 6x139.7 | 106.1 | 15 |
| 2006 | 6x139.7 | 106.1 | 15 |
| 2007 | 5x150 | 110.1 | 60 |
| 2008 | 5x150 | 110.1 | 60 |
| 2009 | 5x150 | 110.1 | 60 |
| 2010 | 5x150 | 110.1 | 60 |
| 2011 | 5x150 | 110.1 | 60 |
| 2012 | 5x150 | 110.1 | 60 |
| 2013 | 5x150 | 110.1 | 60 |
| 2014 | 5x150 | 110.1 | 60 |
| 2015 | 5x150 | 110.1 | 60 |
| 2016 | 5x150 | 110.1 | 60 |
| 2017 | 5x150 | 110.1 | 60 |
| 2018 | 5x150 | 110.1 | 60 |
| 2019 | 5x150 | 110.1 | 60 |
| 2020 | 5x150 | 110.1 | 60 |
| 2021 | 5x150 | 110.1 | 60 |
| 2022 | 6x139.7 | 95.1 | 60 |
| ▸ 2024 | 6x139.7 | 95.1 | 60 |
6x139.7 Pattern Context
This bolt pattern appears on 1067 vehicles in our current database and is considered common.
Examples of other vehicles using 6x139.7:
Expert Buying Guide for 2024 Toyota Tundra Double Cab
The 2024 Toyota Tundra Double Cab retains the 6x139.7 bolt pattern used since 2004, making wheels from any 2004–2024 Tundra Double Cab compatible. However, the center bore is 95.1mm, so aftermarket wheels with a larger bore require hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 60mm; deviations beyond ±10mm may cause rubbing or suspension interference. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—factory wheels use conical (60-degree) seats, while aftermarket wheels may require ball or conical seats. Never mix seat types, as improper seating can lead to wheel loss. Re-torque lug nuts after 50–100 miles of driving.
Historical Fitment Data Reference
In our dataset, Toyota Tundra Double Cab appears from 2004 to 2024 (20 model years). Across model years, this model appears with 2 bolt patterns (5x150, 6x139.7).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 3
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 45.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 126 ft-lb after 50–100 miles of driving.
- ✅ Aftermarket wheels with a center bore larger than 95.1mm must use hub-centric rings; avoid relying solely on lug nuts for centering.
- ✅ Verify offset: staying within 50–70mm offset range prevents rubbing on suspension components or fenders.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2024 Toyota Tundra Double Cab — Frequently Asked Questions
What is the bolt pattern for a 2024 Toyota Tundra Double Cab?
The 2024 Toyota Tundra Double Cab uses a 6x139.7 bolt pattern (also called lug pattern or PCD). The center bore is 95.1mm and the offset is 60mm.
What other years of Toyota Tundra Double Cab have the same bolt pattern as the 2024?
The Toyota Tundra Double Cab uses the 6x139.7 pattern from 2004 through 2024. Wheels from any of these model years are dimensionally compatible with the 2024, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2024 Toyota?
The 2024 Tundra Double Cab uses a 6x139.7 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Will wheels from another Toyota fit my 2024 Tundra Double Cab?
Only if they share the exact same 6x139.7 bolt pattern, a compatible offset, and a center bore equal to or larger than 95.1mm.
Can I put aftermarket wheels on my 2024 Toyota Tundra Double Cab?
Absolutely. Just ensure the aftermarket wheels have a 6x139.7 bolt pattern, an offset near 60mm, and a center bore of at least 95.1mm (using hub rings if larger).
What is the center bore of a 2024 Toyota Tundra Double Cab?
The factory center bore (hub bore) for the 2024 Toyota Tundra Double Cab is 95.1mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset