2019 Volvo S90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2019 Volvo S90, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2019 S90 — Year-Specific Fitment Context
The 2019 Volvo S90 is in year 23 of 28 using the 5x108 pattern (1997–2024). Wheels from any 1997–2024 Volvo S90 are cross-compatible with the 2019 model.
Volvo S90 Bolt Pattern by Year
The table below shows how the S90's wheel specifications have changed over the years. The 2019 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2019 Volvo S90
For your 2019 Volvo S90, the 5x108 bolt pattern is shared with many Volvo models from 1997–2024, but critical dimensions differ. The center bore is 63.4mm; aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibration and ensure proper load transfer. Offset must stay within 45–50mm; deviations risk rubbing on struts or fenders. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—Volvo uses ball seats, not conical. Using wrong lug nuts can cause wheel loosening. Verify all specs before installation.
Historical Fitment Data Reference
In our dataset, Volvo S90 appears from 1997 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 97.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50–100 miles of driving to maintain clamping force.
- ✅ Aftermarket wheels may require hub-centric rings (63.4mm ID to wheel's bore) to avoid vibrations.
- ✅ Check offset carefully; even 2mm outside 45–50mm can cause clearance issues with suspension or brakes.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2019 Volvo S90 — Frequently Asked Questions
What is the bolt pattern for a 2019 Volvo S90?
The 2019 Volvo S90 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-50mm.
What other years of Volvo S90 have the same bolt pattern as the 2019?
The Volvo S90 uses the 5x108 pattern from 1997 through 2024. Wheels from any of these model years are dimensionally compatible with the 2019, provided the offset and center bore also match.
How do I measure the bolt pattern on my 2019 Volvo?
The 2019 S90 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the PCD for a 2019 Volvo S90?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2019 S90, the PCD is 5x108.
What is the factory wheel offset for a 2019 Volvo S90?
The OEM offset for the 2019 S90 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Do 2019 Volvo S90s use lug bolts or lug nuts?
The 2019 S90 requires 14x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset