1998 Volvo S90 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 1998 Volvo S90, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 65.1 mm |
| Offset (ET) | 43 |
| Torque Specs | 80 ft-lbs (108 Nm) |
1998 S90 — Year-Specific Fitment Context
The 1998 Volvo S90 is in year 2 of 28 using the 5x108 pattern (1997–2024). Wheels from any 1997–2024 Volvo S90 are cross-compatible with the 1998 model.
Volvo S90 Bolt Pattern by Year
The table below shows how the S90's wheel specifications have changed over the years. The 1998 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 1998 Volvo S90
For your 1998 Volvo S90, the 5x108 bolt pattern and 65.1mm center bore are critical. Aftermarket wheels must have a bore ≥65.1mm; use hub-centric rings to avoid vibration. The ideal offset is 43mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with 12x1.5 thread pitch and proper seat type (cone or ball) matching your wheels. Incorrect lug nuts can lead to wheel loss. Verify load rating meets or exceeds OEM specs. Cross-compatible with 1997–2024 S90 models.
Historical Fitment Data Reference
In our dataset, Volvo S90 appears from 1997 to 2024 (10 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 3
- Observed total offset span across years: 97.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 Nm after 50 miles of driving.
- ✅ Avoid using universal fit wheels without hub rings; they can cause vibration and stress on studs.
- ✅ Check brake caliper clearance when changing offset; 1998 S90 has tight tolerances.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
1998 Volvo S90 — Frequently Asked Questions
What is the bolt pattern for a 1998 Volvo S90?
The 1998 Volvo S90 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 65.1mm and the offset is 43mm.
What other years of Volvo S90 have the same bolt pattern as the 1998?
The Volvo S90 uses the 5x108 pattern from 1997 through 2024. Wheels from any of these model years are dimensionally compatible with the 1998, provided the offset and center bore also match.
What is the PCD for a 1998 Volvo S90?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 1998 S90, the PCD is 5x108.
What lug nut size does the 1998 Volvo S90 use?
The 1998 Volvo S90 uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Will wheels from another Volvo fit my 1998 S90?
Only if they share the exact same 5x108 bolt pattern, a compatible offset, and a center bore equal to or larger than 65.1mm.
What does 43mm offset mean for the 1998 S90?
An offset of 43mm means the wheel's mounting surface is 43mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset