2021 Volvo XC40 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2021 Volvo XC40, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2021 XC40 — Year-Specific Fitment Context
The 2021 Volvo XC40 is in year 3 of 6 using the 5x108 pattern (2019–2024). Wheels from any 2019–2024 Volvo XC40 are cross-compatible with the 2021 model.
Volvo XC40 Bolt Pattern by Year
The table below shows how the XC40's wheel specifications have changed over the years. The 2021 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2021 Volvo XC40
For your 2021 Volvo XC40, the critical center bore is 63.4mm. Aftermarket wheels often have a larger bore, requiring hub-centric rings to prevent vibrations and ensure proper load transfer. Offset must stay within 45-50mm; deviating can cause rubbing or poor handling. Always use lug nuts with the correct thread pitch (14x1.5) and seat type—Volvo uses a conical (60-degree) seat. Never use ball-seat lug nuts as they can loosen. Re-torque after 50-100 miles. Wheels from 2019-2024 XC40 models are direct fit.
Historical Fitment Data Reference
In our dataset, Volvo XC40 appears from 2019 to 2024 (6 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 103 ft-lb after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 45mm to prevent tire rubbing on suspension components.
- ✅ If using aftermarket wheels, ensure hub-centric rings are installed to match the 63.4mm center bore.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2021 Volvo XC40 — Frequently Asked Questions
What is the bolt pattern for a 2021 Volvo XC40?
The 2021 Volvo XC40 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-50mm.
What other years of Volvo XC40 have the same bolt pattern as the 2021?
The Volvo XC40 uses the 5x108 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2021, provided the offset and center bore also match.
What is the factory wheel offset for a 2021 Volvo XC40?
The OEM offset for the 2021 XC40 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I put aftermarket wheels on my 2021 Volvo XC40?
Absolutely. Just ensure the aftermarket wheels have a 5x108 bolt pattern, an offset near 45-50mm, and a center bore of at least 63.4mm (using hub rings if larger).
How tight should I torque the lug nuts on a 2021 Volvo XC40?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the PCD for a 2021 Volvo XC40?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2021 XC40, the PCD is 5x108.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset