2026 Volvo XC40 Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Volvo XC40 is 5x108. It has a center bore of 63.4 mm, an offset range of 45-50, and utilizes 14x1.5 (Ball seat, 19mm hex) fasteners tightened to 103 ft-lbs (140 Nm).
2026 Volvo XC40 Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 45-50 |
| Thread Size (Lug Nut / Bolt) | 14x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 103 ft-lbs (140 Nm) |
2026 XC40 — Year-Specific Fitment Context
The 2026 model year is the final year of the Volvo XC40's 5x108 bolt pattern run (since 2019). Wheels from any 2019–2026 Volvo XC40 are cross-compatible with the 2026 model.
Volvo XC40 Bolt Pattern by Year
Looking for all generations? View the complete Volvo XC40 (2019–2026) Bolt Pattern & Generation Guide →
The table below shows how the XC40's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Volvo XC40 Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Volvo XC40, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2020 Ford Fusion | 63.4 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2019 Ford Fusion Energi | 63.4 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2020 Ford Fusion Plug-in Hybrid | 63.4 mm (Exact) | 50 | 12x1.5 (Cone) |
| 2025 Ford Maverick | 63.4 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2025 Ford Mustang MACH-E | 63.4 mm (Exact) | 47.5 | 14x1.5 (Flat) |
| 2019 Ford Transit Connect Cargo | 63.4 mm (Exact) | 50 | 12x1.5 (Cone) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 2003 Volvo XC70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2003 Volvo XC90 | 65.1 mm | 65.1mm → 63.4mm |
49 |
| 2008 Ferrari 430 Scuderia | 67.1 mm | 67.1mm → 63.4mm |
45 |
| 2006 Ferrari F430 | 67.1 mm | 67.1mm → 63.4mm |
30 front, 40 rear |
Quick Tips & Safety Warnings
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 103 ft-lbs (140 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Volvo XC40 — Frequently Asked Questions
What is the bolt pattern for a 2026 Volvo XC40?
The 2026 Volvo XC40 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-50mm.
What other years of Volvo XC40 have the same bolt pattern as the 2026?
The Volvo XC40 uses the 5x108 pattern from 2019 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
Can I use spacers on my 2026 Volvo XC40?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
What does 45-50mm offset mean for the 2026 XC40?
An offset of 45-50mm means the wheel's mounting surface is 45-50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Volvo.
How tight should I torque the lug nuts on a 2026 Volvo XC40?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What lug nut size does the 2026 Volvo XC40 use?
The 2026 Volvo XC40 uses 14x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →