2020 Volvo XC40 Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Volvo XC40, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 14x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 45-50 |
| Torque Specs | 100 ft-lbs (135 Nm) |
2020 XC40 — Year-Specific Fitment Context
The 2020 Volvo XC40 is in year 2 of 6 using the 5x108 pattern (2019–2024). Wheels from any 2019–2024 Volvo XC40 are cross-compatible with the 2020 model.
Volvo XC40 Bolt Pattern by Year
The table below shows how the XC40's wheel specifications have changed over the years. The 2020 model year is highlighted.
Fitment Notes
The 2020 Volvo XC40 has a bolt pattern of 5x108.
This means it is a 5 lug pattern with a circle diameter of 108mm. When shopping for aftermarket wheels, ensure the "lug pattern" or "PCD" matches these numbers.
Year-to-Year Fitment Context
In our dataset, Volvo XC40 appears from 2019 to 2024 (6 model years).
Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 95.0 mm
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
2020 Volvo XC40 — Frequently Asked Questions
What is the bolt pattern for a 2020 Volvo XC40?
The 2020 Volvo XC40 uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 45-50mm.
What other years of Volvo XC40 have the same bolt pattern as the 2020?
The Volvo XC40 uses the 5x108 pattern from 2019 through 2024. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2020 Volvo XC40?
Refer to your owner's manual for exact specs, but always tighten the 14x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2020 Volvo?
The 2020 XC40 uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
What is the factory wheel offset for a 2020 Volvo XC40?
The OEM offset for the 2020 XC40 is typically around 45-50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Can I use spacers on my 2020 Volvo XC40?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 14x1.5 hardware.
Fitment Checklist Before You Buy Wheels
- This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Editorial Fitment Notes
Volvo XC40 is generally consistent in bolt-pattern records across model years, but offset and hardware should still be validated before purchase.
- Observed production years in our database: 2019-2024 (6 model years).
- Observed bolt-pattern variants: 1 (5x108).
- Observed total offset span across years: 95.0 mm.
- Observed center-bore variants: 1 | lug-size variants: 1.
Data Quality & Review
Source note: Compiled from manufacturer fitment references, historical wheel data, and internal normalization rules.
Last reviewed: 2026-05-26 | Reviewed by: Bolt Pattern HQ Editorial Team
If you find a discrepancy for 2020 Volvo XC40, please report it via our About page contact so we can verify and update this record.