2006 Cadillac CTS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2006 Cadillac CTS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x115 |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 70.3 mm |
| Offset (ET) | 46 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2006 CTS — Year-Specific Fitment Context
The 2006 Cadillac CTS is in year 4 of 6 using the 5x115 pattern (2003–2008). Wheels from any 2003–2008 Cadillac CTS are cross-compatible with the 2006 model. Across its full production run (2003–2019), the CTS has also used: 5x120.65.
Cadillac CTS Bolt Pattern by Year
The table below shows how the CTS's wheel specifications have changed over the years. The 2006 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x115 | 70.3 | 46 |
| 2004 | 5x115 | 70.3 | 46 |
| 2005 | 5x115 | 70.3 | 46 |
| ▸ 2006 | 5x115 | 70.3 | 46 |
| 2007 | 5x115 | 70.3 | 46 |
| 2008 | 5x115 | 70.3 | 46 |
| 2009 | 5x120.65 | 67.1 | 50 |
| 2010 | 5x120.65 | 67.1 | 50 |
| 2011 | 5x120.65 | 67.1 | 50 |
| 2012 | 5x120.65 | 67.1 | 50 |
| 2013 | 5x120.65 | 67.1 | 50 |
| 2014 | 5x120.65 | 67.1 | 50 |
| 2015 | 5x120.65 | 67.1 | 32 |
| 2016 | 5x120.65 | 67.1 | 32 |
| 2017 | 5x120.65 | 67.1 | 32 |
| 2018 | 5x120.65 | 67.1 | 24 |
| 2019 | 5x120.65 | 67.1 | 24 |
5x115 Pattern Context
This bolt pattern appears on 498 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x115:
Expert Buying Guide for 2006 Cadillac CTS
For your 2006 Cadillac CTS, the bolt pattern is 5x115 with a 70.3mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 46mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat nuts as specified. Avoid universal lug nuts; they can loosen. Re-torque wheels after 50-100 miles. Note that 2003-2008 CTS models share the same fitment, but later models (2009+) use 5x120.65; do not interchange.
Historical Fitment Data Reference
In our dataset, Cadillac CTS appears from 2003 to 2019 (17 model years). Across model years, this model appears with 2 bolt patterns (5x115, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 26.0 mm
Quick Tips & Safety Warnings
- ✅ Always use hub-centric rings if aftermarket wheels have a larger center bore than 70.3mm to avoid vibrations.
- ✅ Re-torque lug nuts to 100 ft-lbs after 50-100 miles of driving to ensure proper seating.
- ✅ Never use wheels from 2009+ CTS (5x120.65) as they will not fit your 5x115 hub without adapters.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2006 Cadillac CTS — Frequently Asked Questions
What is the bolt pattern for a 2006 Cadillac CTS?
The 2006 Cadillac CTS uses a 5x115 bolt pattern (also called lug pattern or PCD). The center bore is 70.3mm and the offset is 46mm.
What other years of Cadillac CTS have the same bolt pattern as the 2006?
The Cadillac CTS uses the 5x115 pattern from 2003 through 2008. Wheels from any of these model years are dimensionally compatible with the 2006, provided the offset and center bore also match.
How tight should I torque the lug nuts on a 2006 Cadillac CTS?
Refer to your owner's manual for exact specs, but always tighten the N 12x1.50 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2006 Cadillac CTS?
The factory center bore (hub bore) for the 2006 Cadillac CTS is 70.3mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Do 2006 Cadillac CTSs use lug bolts or lug nuts?
The 2006 CTS requires N 12x1.50 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Can I use spacers on my 2006 Cadillac CTS?
Yes, but ensure the wheel spacers match the 5x115 bolt pattern and 70.3mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset