2010 Cadillac CTS Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2010 Cadillac CTS, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x120.65 (5x4.75") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 67.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x120.65 is commonly referred to as 5x4.75" in US Standard.
2010 CTS — Year-Specific Fitment Context
The 2010 Cadillac CTS is in year 2 of 11 using the 5x120.65 pattern (2009–2019). Wheels from any 2009–2019 Cadillac CTS are cross-compatible with the 2010 model. Across its full production run (2003–2019), the CTS has also used: 5x115.
Cadillac CTS Bolt Pattern by Year
The table below shows how the CTS's wheel specifications have changed over the years. The 2010 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 2003 | 5x115 | 70.3 | 46 |
| 2004 | 5x115 | 70.3 | 46 |
| 2005 | 5x115 | 70.3 | 46 |
| 2006 | 5x115 | 70.3 | 46 |
| 2007 | 5x115 | 70.3 | 46 |
| 2008 | 5x115 | 70.3 | 46 |
| 2009 | 5x120.65 | 67.1 | 50 |
| ▸ 2010 | 5x120.65 | 67.1 | 50 |
| 2011 | 5x120.65 | 67.1 | 50 |
| 2012 | 5x120.65 | 67.1 | 50 |
| 2013 | 5x120.65 | 67.1 | 50 |
| 2014 | 5x120.65 | 67.1 | 50 |
| 2015 | 5x120.65 | 67.1 | 32 |
| 2016 | 5x120.65 | 67.1 | 32 |
| 2017 | 5x120.65 | 67.1 | 32 |
| 2018 | 5x120.65 | 67.1 | 24 |
| 2019 | 5x120.65 | 67.1 | 24 |
5x120.65 Pattern Context
This bolt pattern appears on 202 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x120.65:
Expert Buying Guide for 2010 Cadillac CTS
For the 2010 Cadillac CTS, the bolt pattern is 5x120.65 with a center bore of 67.1mm. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always use lug nuts with the correct thread pitch (12x1.5) and seat type (conical/60-degree) to avoid wheel loosening. Cross-compatible wheels from 2009–2019 CTS models share the same pattern, but verify offset and bore. Never reuse old lug nuts; torque to manufacturer specs (100 lb-ft) and re-torque after 50 miles.
Historical Fitment Data Reference
In our dataset, Cadillac CTS appears from 2003 to 2019 (17 model years). Across model years, this model appears with 2 bolt patterns (5x115, 5x120.65).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 2
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 26.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 100 lb-ft after 50 miles of driving to account for wheel settling.
- ✅ Avoid using wheels with a center bore larger than 67.1mm without hub-centric rings; vibration and stress on studs can occur.
- ✅ Check inner clearance for brake calipers when using wheels with offset below 45mm; the CTS has large front brakes.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2010 Cadillac CTS — Frequently Asked Questions
What is the bolt pattern for a 2010 Cadillac CTS?
The 2010 Cadillac CTS uses a 5x120.65 bolt pattern (also called lug pattern or PCD). The center bore is 67.1mm and the offset is 50mm.
What other years of Cadillac CTS have the same bolt pattern as the 2010?
The Cadillac CTS uses the 5x120.65 pattern from 2009 through 2019. Wheels from any of these model years are dimensionally compatible with the 2010, provided the offset and center bore also match.
What is the PCD for a 2010 Cadillac CTS?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2010 CTS, the PCD is 5x120.65.
What does 50mm offset mean for the 2010 CTS?
An offset of 50mm means the wheel's mounting surface is 50mm away from its centerline. Changing this value drastically can affect suspension geometry and wheel bearing wear on your Cadillac.
Can I use spacers on my 2010 Cadillac CTS?
Yes, but ensure the wheel spacers match the 5x120.65 bolt pattern and 67.1mm center bore. Also verify that you have enough thread engagement for your N 12x1.50 hardware.
How do I measure the bolt pattern on my 2010 Cadillac?
The 2010 CTS uses a 5x120.65 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset