2026 Ford Bronco Sport Bolt Pattern
Quick Answer: The factory bolt pattern (lug pattern) for a 2026 Ford Bronco Sport is 5x108. It has a center bore of 63.4 mm, an offset range of 35-45, and utilizes 12x1.5 (Ball seat, 19mm hex) fasteners tightened to 100 ft-lbs (135 Nm).
2026 Ford Bronco Sport Wheel Fitment Specs
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Center Bore (Hub Bore) | 63.4 mm |
| Offset Range (ET) | 35-45 |
| Thread Size (Lug Nut / Bolt) | 12x1.5 |
| Fastener Seat Type | Radius / Spherical (Ball Seat) |
| Lug Wrench / Socket Hex Size | 19mm |
| Wheel Torque Specs | 100 ft-lbs (135 Nm) |
2026 Bronco Sport — Year-Specific Fitment Context
The 2026 model year is the final year of the Ford Bronco Sport's 5x108 bolt pattern run (since 2021). Wheels from any 2021–2026 Ford Bronco Sport are cross-compatible with the 2026 model.
Ford Bronco Sport Bolt Pattern by Year
Looking for all generations? View the complete Ford Bronco Sport (2021–2026) Bolt Pattern & Generation Guide →
The table below shows how the Bronco Sport's wheel specifications have changed over the years. The 2026 model year is highlighted.
2026 Ford Bronco Sport Wheel Interchange & Donor Fitment Guide (5x108)
The 5x108 bolt pattern is shared by 606 vehicles in our database (common). For safe wheel swaps on the 2026 Ford Bronco Sport, donor rims must match the 5x108 PCD and have a center bore of at least 63.4 mm:
DIRECT HUB MATCH Same 5x108 Pattern & Exact 63.4mm Center Bore (No Hub Rings Needed)
| Compatible Donor Vehicle | Center Bore | OEM Offset (ET) | Lug Thread & Seat |
|---|---|---|---|
| 2025 Land Rover Discovery Sport | 63.4 mm (Exact) | 35-45 | 14x1.5 (Flat) |
| 2015 Land Rover LR2 | 63.4 mm (Exact) | 45 | 14x1.5 (Cone) |
| 2025 Land Rover Range Rover Evoque | 63.4 mm (Exact) | 35-45 | 14x1.5 (Ball) |
| 2025 Land Rover Range Rover Velar | 63.4 mm (Exact) | 40-45 | 14x1.5 (Flat) |
| 2025 Lincoln Corsair | 63.4 mm (Exact) | 50-55 | 12x1.5 (Ball) |
| 2019 Lincoln MKC | 63.4 mm (Exact) | 35-50mm | M12x1.5 (Cone) |
HUB RING FITMENT Same 5x108 Pattern with Larger Center Bore (Hub-Centric Ring Required)
| Donor Vehicle | Donor Bore | Required Hub Ring (OD → ID) | OEM Offset (ET) |
|---|---|---|---|
| 1996 Volvo 850 | 65.1 mm | 65.1mm → 63.4mm |
43 |
| 2016 Volvo S80 | 65.1 mm | 65.1mm → 63.4mm |
52,5 |
| 1992 Lincoln Continental | 70.5 mm | 70.5mm → 63.4mm |
40 |
| 2005 Maserati GranSport | 67.1 mm | 67.1mm → 63.4mm |
53 |
| 1992 Volvo 240 | 65.1 mm | 65.1mm → 63.4mm |
25 |
| 1998 Volvo C70 | 65.1 mm | 65.1mm → 63.4mm |
43 |
Quick Tips & Safety Warnings
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ This fitment uses a wide offset range. Check brake clearance and fender clearance before buying wheels.
- ⚠️ Torque lugs in a star pattern to 100 ft-lbs (135 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2026 Ford Bronco Sport — Frequently Asked Questions
What is the bolt pattern for a 2026 Ford Bronco Sport?
The 2026 Ford Bronco Sport uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 35-45mm.
What other years of Ford Bronco Sport have the same bolt pattern as the 2026?
The Ford Bronco Sport uses the 5x108 pattern from 2021 through 2026. Wheels from any of these model years are dimensionally compatible with the 2026, provided the offset and center bore also match.
What lug nut size does the 2026 Ford Bronco Sport use?
The 2026 Ford Bronco Sport uses 12x1.5 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
Can I use spacers on my 2026 Ford Bronco Sport?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2026 Ford Bronco Sport?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
What is the center bore of a 2026 Ford Bronco Sport?
The factory center bore (hub bore) for the 2026 Ford Bronco Sport is 63.4mm. If your aftermarket wheels have a larger hub bore, you will need hub-centric rings to prevent vibration.
Running a Tire Shop or Wheel Store?
Stop looking up vehicles one by one. Search all 12,902 verified fitments (1992–2026) in Excel or import them straight into your Shopify YMM filter, POS, or quoting tool — one-time $47, no monthly API fees.
Get Master Spreadsheet (CSV) →