2020 Ford Transit Connect Passenger Wagon Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2020 Ford Transit Connect Passenger Wagon, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x108 |
|---|---|
| Lug Nut / Bolt Size | 12x1.5 |
| Center Bore (CB) | 63.4 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
2020 Transit Connect Passenger Wagon — Year-Specific Fitment Context
The 2020 model year marks the beginning of the Ford Transit Connect Passenger Wagon's 5x108 bolt pattern era, which continued through 2023 (4 consecutive years). Wheels from any 2020–2023 Ford Transit Connect Passenger Wagon are cross-compatible with the 2020 model.
Ford Transit Connect Passenger Wagon Bolt Pattern by Year
The table below shows how the Transit Connect Passenger Wagon's wheel specifications have changed over the years. The 2020 model year is highlighted.
5x108 Pattern Context
This bolt pattern appears on 570 vehicles in our current database and is considered moderately common.
Examples of other vehicles using 5x108:
Expert Buying Guide for 2020 Ford Transit Connect Passenger Wagon
The 2020 Ford Transit Connect Passenger Wagon uses a 5x108 bolt pattern with a 63.4mm center bore. When selecting aftermarket wheels, ensure the center bore matches or use hub-centric rings to prevent vibration and ensure proper load distribution. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues with suspension and brake components. Always verify lug nut thread pitch (12x1.5) and seat type—factory wheels use a conical (60-degree) seat. Using incorrect lug nuts can lead to wheel loosening. For safety, avoid ball-seat lug nuts unless specified by the wheel manufacturer.
Historical Fitment Data Reference
In our dataset, Ford Transit Connect Passenger Wagon appears from 2020 to 2023 (4 model years). Across recorded model years, this model generally keeps the same bolt pattern.
- Observed bolt-pattern variants for this model: 1
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 1
- Observed total offset span across years: 0.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts after 50-100 miles of driving to maintain proper clamping force.
- ✅ If using aftermarket wheels, always confirm hub-centric ring inner diameter matches 63.4mm and outer diameter matches the wheel's hub bore.
- ✅ Check brake caliper clearance when changing offset; a 5mm spacer may be needed for some aftermarket wheels to avoid contact.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2020 Ford Transit Connect Passenger Wagon — Frequently Asked Questions
What is the bolt pattern for a 2020 Ford Transit Connect Passenger Wagon?
The 2020 Ford Transit Connect Passenger Wagon uses a 5x108 bolt pattern (also called lug pattern or PCD). The center bore is 63.4mm and the offset is 50mm.
What other years of Ford Transit Connect Passenger Wagon have the same bolt pattern as the 2020?
The Ford Transit Connect Passenger Wagon uses the 5x108 pattern from 2020 through 2023. Wheels from any of these model years are dimensionally compatible with the 2020, provided the offset and center bore also match.
Can I use spacers on my 2020 Ford Transit Connect Passenger Wagon?
Yes, but ensure the wheel spacers match the 5x108 bolt pattern and 63.4mm center bore. Also verify that you have enough thread engagement for your 12x1.5 hardware.
How tight should I torque the lug nuts on a 2020 Ford Transit Connect Passenger Wagon?
Refer to your owner's manual for exact specs, but always tighten the 12x1.5 hardware in a star or crisscross pattern. Re-torque after the first 50 miles of driving.
How do I measure the bolt pattern on my 2020 Ford?
The 2020 Transit Connect Passenger Wagon uses a 5x108 pattern. For 4, 6, or 8-lug wheels, measure center-to-center across opposite holes. For 5-lug, measure from the center of one hole to the back of the opposite hole.
Do 2020 Ford Transit Connect Passenger Wagons use lug bolts or lug nuts?
The 2020 Transit Connect Passenger Wagon requires 12x1.5 hardware. Check your specific trim to ensure you use the correct conical or spherical seating.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset