2011 Honda CR-V Bolt Pattern
Checking fitment for your vehicle? Below you will find the factory bolt pattern (also known as the lug pattern) for the 2011 Honda CR-V, along with offset and center bore data.
| Bolt Pattern (Lug Pattern) | 5x114.3 (5x4.5") |
|---|---|
| Lug Nut / Bolt Size | N 12x1.50 |
| Center Bore (CB) | 64.1 mm |
| Offset (ET) | 50 |
| Torque Specs | 80 ft-lbs (108 Nm) |
Imperial Match: 5x114.3 is commonly referred to as 5x4.5" in US Standard.
2011 CR-V — Year-Specific Fitment Context
The 2011 Honda CR-V is in year 9 of 22 using the 5x114.3 pattern (2003–2024). Wheels from any 2003–2024 Honda CR-V are cross-compatible with the 2011 model. Across its full production run (1997–2024), the CR-V has also used: 4x114.3.
Honda CR-V Bolt Pattern by Year
The table below shows how the CR-V's wheel specifications have changed over the years. The 2011 model year is highlighted.
| Year | Bolt Pattern | Center Bore | Offset |
|---|---|---|---|
| 1997 | 4x114.3 | 64.1 | 50 |
| 1998 | 4x114.3 | 64.1 | 50 |
| 1999 | 4x114.3 | 64.1 | 50 |
| 2000 | 4x114.3 | 64.1 | 50 |
| 2001 | 4x114.3 | 64.1 | 50 |
| 2002 | 4x114.3 | 64.1 | 50 |
| 2003 | 5x114.3 | 64.1 | 50 |
| 2004 | 5x114.3 | 64.1 | 50 |
| 2005 | 5x114.3 | 64.1 | 50 |
| 2006 | 5x114.3 | 64.1 | 50 |
| 2007 | 5x114.3 | 64.1 | 50 |
| 2008 | 5x114.3 | 64.1 | 50 |
| 2009 | 5x114.3 | 64.1 | 50 |
| 2010 | 5x114.3 | 64.1 | 50 |
| ▸ 2011 | 5x114.3 | 64.1 | 50 |
| 2012 | 5x114.3 | 64.1 | 50 |
| 2013 | 5x114.3 | 64.1 | 50 |
| 2014 | 5x114.3 | 64.1 | 50 |
| 2015 | 5x114.3 | 64.1 | 50 |
| 2016 | 5x114.3 | 64.1 | 50 |
| 2017 | 5x114.3 | 64.1 | 50 |
| 2018 | 5x114.3 | 64.1 | 45 |
| 2019 | 5x114.3 | 64.1 | 45 |
| 2020 | 5x114.3 | 64.1 | 45 |
| 2021 | 5x114.3 | 64.1 | 45 |
| 2022 | 5x114.3 | 64.1 | 45 |
| 2023 | 5x114.3 | 64.1 | 45 |
| 2024 | 5x114.3 | 64.1 | 45 |
5x114.3 Pattern Context
This bolt pattern appears on 2902 vehicles in our current database and is considered very common.
Examples of other vehicles using 5x114.3:
Expert Buying Guide for 2011 Honda CR-V
The 2011 Honda CR-V uses a 5x114.3 bolt pattern with a 64.1mm center bore. When selecting aftermarket wheels, hub-centric rings are essential to ensure proper centering and prevent vibrations. The factory offset is 50mm; deviations beyond ±5mm may cause rubbing or clearance issues. Always verify lug nut thread pitch (12x1.50) and seat type—use conical (60-degree) or ball seat nuts as specified. Improper lug nuts can lead to wheel loosening. For safety, re-torque after 50-100 miles of driving.
Historical Fitment Data Reference
In our dataset, Honda CR-V appears from 1997 to 2024 (28 model years). Across model years, this model appears with 2 bolt patterns (4x114.3, 5x114.3).
- Observed bolt-pattern variants for this model: 2
- Observed center-bore variants for this model: 1
- Observed lug-size variants for this model: 2
- Observed total offset span across years: 5.0 mm
Quick Tips & Safety Warnings
- ✅ Re-torque lug nuts to 80 ft-lbs after 50-100 miles of driving.
- ✅ Avoid wheels with offset below 45mm to prevent fender rubbing.
- ✅ Use hub-centric rings (64.1mm bore) for aftermarket wheels to avoid vibrations.
- ⚠️ Verify thread pitch before installation; M12x1.25 and M12x1.5 are not interchangeable.
- ⚠️ Confirm bolt pattern carefully. 5x114.3 is often confused with other common 5-lug patterns.
- ⚠️ Torque lugs in a star pattern to 80 ft-lbs (108 Nm), then re-check torque after 50-100 km (30-60 miles).
- ⚠️ This model has multiple bolt-pattern records across years. Match wheels to exact year/trim before purchase.
Ready to upgrade or perform maintenance?
🛒 Shop Tools & Accessories on AmazonAs an Amazon Associate, I earn from qualifying purchases.
2011 Honda CR-V — Frequently Asked Questions
What is the bolt pattern for a 2011 Honda CR-V?
The 2011 Honda CR-V uses a 5x114.3 bolt pattern (also called lug pattern or PCD). The center bore is 64.1mm and the offset is 50mm.
What other years of Honda CR-V have the same bolt pattern as the 2011?
The Honda CR-V uses the 5x114.3 pattern from 2003 through 2024. Wheels from any of these model years are dimensionally compatible with the 2011, provided the offset and center bore also match.
What lug nut size does the 2011 Honda CR-V use?
The 2011 Honda CR-V uses N 12x1.50 lug nuts. Always verify the thread pitch and seat type (cone, ball, or flat) match your aftermarket wheels.
What is the PCD for a 2011 Honda CR-V?
PCD stands for Pitch Circle Diameter, which is the same as the bolt pattern. For the 2011 CR-V, the PCD is 5x114.3.
What is the factory wheel offset for a 2011 Honda CR-V?
The OEM offset for the 2011 CR-V is typically around 50mm. Depending on wheel width, a deviation of ±5mm is usually acceptable, but verify suspension clearance.
Why is matching the 64.1mm center bore important for the 2011 CR-V?
The 64.1mm center bore ensures the wheel is perfectly centered on the hub. If the wheel is lug-centric instead of hub-centric, you may experience steering wheel vibration at highway speeds.
Need more vehicle fitment data?
Access our complete, raw JSON/CSV database of over 11,000+ vehicles for your next app or project.
Get the Full Dataset